Jump to content
SAU Community

Recommended Posts

Possibly due to the getrag box???

I'm not sure,I was going to reco a 33 gtr twin plate for my 34, but I don't want to waste my time.

Not the same Rick. Get a Nismo coppermix twin mate you will be very happy with it, I know they are pricey.

So you have to change the flywheel when you even get a single plate if the flywheel needs machining at all? And does that mean that a 33 GTR twin which comes with its own flywheel is ok?

Rick I think you will find the spline on the shaft is different so the 33GTR clutch is no good to you .

R34 GTR flywheels are dual mass ( 2 piece ) just like subaru liberty .

I agree with that and the latest coppermix is even better.

I spoke at length with wrxhoon and others before deciding that for the mainly commuting and road driving (vs drags or track work), i was better with a single which Jim Berry built for me with uprated pressure plate, and new single mass flywheel. It was obviously cheaper, but was even lighter clutch action and a dream to use on my daily sydney commute. I am really happy, I know wrxhoon is happy with his coppermix, and others will be with theirs, so its probably about application 1st, then decide on the best clutch brand material etc etc.

Cheers

Ned

I spoke to Jim berry and he does go for the single, but at $1800 with flywheel I believe I could get a nengun nismo twin in...unless I can find a better value single which sounds like it needs a flywheel anyway, I might just have to keep saving.

are the nismo twin plates noisy at all? just wondering because a mate of mine has a F6 with a $4000 twin plate from over east which is meant to handle 1000rwhp but at idle its pretty damn noisy. His clutch is very hardcore, but i wouldnt want a clutch in daily driver that was making rattles and what not.

are the nismo twin plates noisy at all? just wondering because a mate of mine has a F6 with a $4000 twin plate from over east which is meant to handle 1000rwhp but at idle its pretty damn noisy. His clutch is very hardcore, but i wouldnt want a clutch in daily driver that was making rattles and what not.

thats most likely to be the gearbox not the clutch if it goes away with the clutch pedal depressed.

its normal for a bit of noise in the gearbox when idleing. put the foot on the clutch and it should go away though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...