Jump to content
SAU Community

R32 Gts-t Td-06 Equiped

grandmasterb
 Share

Recommended Posts

grandmasterb Grand Master

grandmasterb

Posted
Posted

Im selling my car and moving on for a while, as im over cars and all the headaches.

Details as follows:

1990 R32 GTS-t Mspec

RB20 motor with 70,000ks

strong RB20 gearbox with C's short shift kit

TD-06 20g L2 turbo kit comes with lines manifold, 3" dump, 47mm external gate with screamer fitted. (Full GReddy kit)

HYBRID GT FMIC with GReddy hotpipe

Just Jap oil cooler and relocation kit

APEXI power intake

NISMO dash

BRIDE fixed back driver seat (standard passangers seat)

OMORI oil pressure & temp, water temp and exhaust gauges

GReddy boost gauge

2 way

TEIN shocks and springs

16" RAYS Syver rims with legal rubber

front and rear strut brace

Cyclops Alarm with 2 point immobiliser and turbo timer

PLUS OTHERS

Interior is in A1 condition and has car has working A/C.

Paint is deep blue and is in great condition, the car has no rust or dents and is perfectly straight.

Things that need looking at:

desperate need of wash and polish

Hole in left reverse light

$14500 as is or $16800 with extra's

Car is out of rego but if its a local sale can arrange a AIS inspection so its ready to be registered again.

Grab yourself a bargain today as this car is perfect for a daily, track weapon or drift machine.

PM or reply for more details.

Cheers GMB

post-17838-1174521602.jpg

post-17838-1174521685.jpg

post-17838-1174521895.jpg

Link to comment
https://www.sau.com.au/forums/topic/161416-r32-gts-t-td-06-equiped/
Share on other sites
nice 28 Proficient

nice 28

Posted
Posted

Your car looks mint mate except i think your being a bit optimistic with your price.

9.5k for a car that needs an engine rebuild is a bit dear.

Anyway good luck with the sale.

grandmasterb Grand Master

grandmasterb

Posted
  • Author
Posted
Your car looks mint mate except i think your being a bit optimistic with your price.

9.5k for a car that needs an engine rebuild is a bit dear.

Anyway good luck with the sale.

Different strokes for different folks old kid.

$500 for another stock 20 or rebuild for 1k and you have one very well set up car that is the perfect base for track, drift, drag or the perfect daily sleeper :wave:

The car was pushing 200+rwk out of a stock 20 on 14psi and HAS alot more potential so think what it can do with a freshen up ;)

Find me another car around the same price with the same gear that has the same amount of potential with no rust or dents???

If i had the time or money i would hold onto it myself but i dont hence the sale.

The price is negotiable and for everything that the car comes with i think its reasonably price :unsure:

Cheers GMB

grandmasterb Grand Master

grandmasterb

Posted
  • Author
Posted

There is a RB20 with 75,000ks and in exceptionally great health that will be in Tasmania in the next few weeks (currently in Victoria)

$1000 for the motor and its ready to drop straight into the car for one hell of a daily :wave:

Open to offers on the car :unsure:

GMB

grandmasterb Grand Master

grandmasterb

Posted
  • Author
Posted
Got any engine bay pics?

How much would it cost to send a car like this to Sydney?

Here is an old engine bay pic, will get some new ones up ASAP.

Not 100% sure costs but i would say around $500ish to send to Sydney... If you give me your postcode i can find out if you like???

Cheers GMB

  • 3 weeks later...
  • 2 weeks later...
grandmasterb Grand Master

grandmasterb

Posted
  • Author
Posted

PM's replied.

To the people that enquired about freight to Melbourne, it would be cheaper for me to drive it up and put it on the spirit and you meet it on the other side :)

Cheers GMB

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What brakes on R34 GTT(Europe)

      By Dose Pipe Sutututu · Posted

      Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...