Jump to content
SAU Community

Recommended Posts

When I park my R34 face up on my driveway at home (steep, but not too bad - see picture) it misses a beat every few seconds.

I hooked up a fuel mixture display kit from Jaycar and you can see when it misses it goes Lean then back to normal and the pattern continues..

I'm just wondering whether there's something wrong with my car or whether it's a design fault over the whole line of 34's (or atleast Series 1)

The car runs perfect in every other situation except this one..

post-26304-1174539889.jpg

Link to comment
https://www.sau.com.au/forums/topic/161452-r34-misses-a-beat-on-hill/
Share on other sites

does it only do it on your driveway or have you ever seen it do it on a flat road? Have you mucked around with the timing at all? Whens the last time you checked your plugs? Dirty plugs or plugs that have been gapped too close can cause what you are mentioning but the driveway shouldnt really effect that. My bros r33 does a simular thing at idle but it will do it on a flat surface, but i think that has something to do with the timing he has smashed into it.

When it happens is your car low on fuel?

The pump is towards the front of the fuel tank!

yeah but on that driveway it wouldnt make that much of a difference, if he was on the fuel light for 100km then it started to it then maybe

i could be wrong but i dont think the fuel pump is at the front on the r34s, i only say this because i have a really steep downward sloping driveway and once i was really low on fuel and i couldnt get it started on the slope, i had to roll down to the bottom where it was flat and then it came to life.

Edited by R34GTFOUR
what fuel pump do you have? if its stock how many km on the car? whens the last time the fuel filter was changed?

The stock fuel pump..car has around 35,000km & fuel filter only changed 2,000km ago.

My Missus' driveway is ridiculously steep & my car starts normally as if it were on a flat surface

Mine's a series 1 aswell. Your car just might be a sped afterall :sorcerer: :glare:

Edited by Yo-Yo

Beh! ^ :glare:

When it comes time to change my pod filter I'm gonna try putting my standard airbox back in because I actually can't remember the car doing it with it standard..we'll see how that goes I suppose.

sort of off topic but my turbo sss does the same on my driveway and its on a hill. i was told it could be coz my pump is to the front of the tank and apprently fuel pumps need constant pressure in the lines and its missing coz its getting some air in the line? something like that.... mine doesnt seem to do it when ive just filled up but does when its either half or almost empty. also been told could be my quad throttle bodies not shutting completely dunno mite help..

Tried putting my standard airbox back in but of course that didn't change anything - I just hoped it would for some reason.

I've been told it could be something to do with a "roll over" sensor? Dunno if the 34's have them or not..haven't been able to find any info..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...