Jump to content
SAU Community

Recommended Posts

Nissan R33 Skyline 4WD 4door Manual *RARE*

Manual RB25DE

Up for sale is a 1994 Nissan Skyline R33 4wd Non-Turbo Skyline powered by a RB25DE.

Would make a very quick project car or a good p plater project that could be turbo'd once your off your p's

I recently got this from my cousin who has since moved overseas.

This is a rare find as not many people have come across a r33 4door 4wd in manual and even importers who ive spoken to have told me you only hear about these really and not many are on the road in this form.

The car has as follows:

Cold Air Intake w/pod

Aftermarket 17inch rims

2.5 to 2.25 exhaust with cannon

Just serviced it last friday with all new oils,coolant,platinum spark plugs

Feb 08 NSW Rego

CD Player

124XXXkms

Immac Interior, Kms show through the condition of the inside (dark grey, woodgrain around gear shifter)

Great exterior (gunmetal grey), slight chip on rear bumper, nothing too noticeable

4wd system very simular to the gtr models, when we had it up on the hoist on friday afternoon we found that some of the parts under the rear left tyre had R33 GTR markings on them, so this potentially could be a very quick skyline if you have the time and money to put into it

Im selling it because i dont have time to have this thing off the road to turbo it. Im running a business and to have this in a workshop takes up too much time.

For less than half the price of a r33 gtr this can be turned into a weapon if done correctly.

Being a 4 door is even better because insurance is much cheaper!

Ive attatched a few pics to give you an idea of it

Ive sourced out a rb25det motor ecu afm etc for about 1500 so if anyone wanted to have the contact, after buying the car i will give you those details so you can organise the motor which will bolt straight in and you can do the math... rb25det + decent amount of boost + 4wd = a quick r33

Asking Price: $10000.00 no offers

Link to comment
https://www.sau.com.au/forums/topic/161933-1994-nissan-skyline-r33/
Share on other sites

  • 2 weeks later...
all it needs is a RB26, great project car and hard to find.

Good Luck mate.

i know i wish i had the time and money to put into it! alot of people who ive spoken to tell me theyve heard of these but never seen one.

got quoted 6.5k for a full rb26 motor box etc for the conversion

1.5k for a rb25det which will bolt straight up to the box already in this

wanting to move onto something already turbo, with my business i barely have time to scratch my ass let alone worry about not having a car to get around with if this was off the road.

thnx :)

it's a good base for an engine transplant..

that's it..

that is why people are not interested.

The fact is, if you spent $10K on a good rb26dett transplant, it would fetch over $20K.

but as it stands, it is a 1500kg+ series 1 4 door skyline which would be bullied by a swift gti.

It's a rare car... It's a shame no-one sees the potential

Good luck.

it's a good base for an engine transplant..

that's it..

that is why people are not interested.

The fact is, if you spent $10K on a good rb26dett transplant, it would fetch over $20K.

but as it stands, it is a 1500kg+ series 1 4 door skyline which would be bullied by a swift gti.

It's a rare car... It's a shame no-one sees the potential

Good luck.

i was considering doing the rb26dett transplant but knowing my luck id be lucky to get 15k for it once done and then im losing more even!

thanks for the kind words, hopefully someone considers it to be their project soon.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...