Jump to content
SAU Community

Recommended Posts

I am looking for things that i can buy for my car (r30 skyline hatchback), though i need to find cheap things.

I am trying to make it look better as i am already making it sound better....just some helpful tips on what could make

my hunk of junk look better then it already does.

cheers guys

DKr30

some of those spinning hubcaps are always a winner in my book

nice^^^^^^^

if you are just after looks get some tuff oldschool rims. no chrome.

or wack a rb20 and big front mount cooler. that will look tuff

I am looking for things that i can buy for my car (r30 skyline hatchback), though i need to find cheap things.

I am trying to make it look better as i am already making it sound better....just some helpful tips on what could make

my hunk of junk look better then it already does.

cheers guys

DKr30

Firstly, NEVER NEVER refer to anR30 as a "hunk of junk". Go wash your mouth out with brake fluid, then come back with a little more respect for an offspring of Factory 5. We might then offer you some assistance. :laugh::) :) :nuke: :nuke:

im with 66yo!

Its not junk until its crushed into a 1m cube...

but dude get a picture up, we might be able to sort something out...

It depends on what look you are after.

either the tuff arse '80s skyline, the classic Nissan look, or the ricer punk racer boy

R31 rear shock absorbers and springs will fit the rear end, and will lower it about 30mm ( im pretty sure on this one)

what wheels do you have?? some R31 Ti rims would look ok if they are all polished up etc.

My brother got my FWD Ti pintara rims ( 15 inch solid alloy with slots ) and put the car up on stands, started engine, put into gear and the fronts start spining, (VERY dangerous), he then got sandpaper of various grades and sanded off the clearcoat, then polished up the rims so well they were mirror, looked like chrome! looked shmic...

seat covers always look better than crappy stained seats,

Take out the grille and respray in matt black, a few coats looks good,

go to wreckers , get some nissan bages, polish em up and put on body of car, or debadge the rear end, make sure no glue left...

get detailer to cut & polish up the paintwork, about $100 but worth it. ( & keep it clean too!)

tyre shine on external plastic bumpers, mirrors and window trims brings the whole appearance up a heap.

OLD auto trans fluid is also a good one for window trims.

A chrome exhaust tip

new pinstriping (from auto barn) ( electricians tape is a cheap arse TEMPORARY solution. just to see what its like before you buy the good stuff. elec tape peeles and fades in the sun)

like MAG86 said:

cut and polish for sure, matching seat covers front and rear, clean up the trim.... $100ish

the r31 fronts will work as well to give it the lower stance all round.

depending on what you mean by cheap you could save $$$ by buying r31 sports suspension and use the standard r31 springs and front struts, for about $850 you have good suspension lowered about 30mm and larger front brakes....

i have TRX rims on the HR30 just sprayed black cost $120 + tyres, i just like black rims ???

look for the HR/DR30 tail light, the DR30 ones look more like R31 late model ones, the HR30 look like the standard r30 ones but only the Skyline circle centre lights up... looks cool.... $300ish id say

hr30rearlights.jpg

Edited by rsx84

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Biggest thing is you're okay!   It sounds like between the accident, and the drive home, it was a pretty torturous trip again! On the bright side, you took the opportunity to enjoy the event more from the perspective of a spectator, than as an entrant!   Sad to see so much damage to the car. It really has taken a HUGE hit in the front end. If/when you choose to repair, hopefully the rails are straight (At least from shock tower backwards). Hopefully the extra cage coming through there has save most of the chassis rails, and HOPEFULLY saved the motor too. Best of luck when you eventually get motivated to start pulling it down to check it all out
    • Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
×
×
  • Create New...