Jump to content
SAU Community

Recommended Posts

I have recently rebuilt my '96 R33 GTS-t, replacing the turbo and many other parts. The following are whats been left over either not required or replaced as explained. Prefer not to ship the turbo or dump pipe if at all possible. I am located in Melbourne.

ARC - Airbox

- As above, suits a ECR33, was used for around a year

- Has ARC label and suits the standard turbo or the GT-RS above. The GT2835 has a different outlet so no longer fits.

- As per Nengun - ARC Airbox

- $250

Defi - Exhaust Temperature Gauge

- Not required, had plenty of other gauges

- The Defi control box is required to operate, but comes with sensor etc.

- This is not a BF but a normal Defi Link - Gauge

- $180

--

Nismo Low Temp Thermostat

- Not needed, brand new never installed

- As per Nengun - Nismo Thermostat

- $50

SOLD PENDING PAYMENT

Catco - High flow cat

- Highest flowing cat available, brand new, never installed

- As purchased from batmbl on the forums - BOS Importing

- $320

SOLD

CES - Split Front/Dump Pipe

- Purchased from CES in Queensland for around $600 (should be able to find receipt)

- Was purchased as the stainless steel with ceramic coating model

- Attachment has been inserted by mechanic for tuning/etc.

- Splitter flange for the turbo has been removed to suit the GT-RS turbo (which already has this)

- Some scrapes on the bottom, can take more photos if required

- $200

SOLD

HKS GT-RS turbo + short parts

- Was replaced with a HKS GT2835 after rebuild

- Original installation problem damaged core which was replaced by Racepace (receipt available) at a cost of ~ $1000 less than 10,000km ago

- Brand new HKS lines/connectors (from the new GT2835)

- Original HKS J Pipe

- Purchased at Nengun - GT-RS May 2005 for $2600

- $1800 - Will now do $1700 + post

SOLD

Blitz - SBC Dual Solenoid Boost Controller

- Among the best available boost controller with dual solenoid

- Brand new, ended up not needing it

- As available on Nengun - Blitz SBC

- $420

SOLD

Greddy Radiator Breather Tank

- Not needed, brand new never installed

- 8mm as available on Nengun - Greddy Breather Tank

- $120

SOLD

Greddy water temp gauge adapter

- not needed, brand new never installed

- As per Nengun - Water adapter

- $20

SOLD

Nismo - Fuel Pressure Regulator

- Not needed, brand new never installed but no longer have box

- As per Nengun - FPR

- $120

SOLD

Greddy - Catchcan

- Used, comes with hoses to fit ECR33 breather lines, no longer needed

- Fairly good condition, genuine Greddy as purchased from Nengun

- $90

SOLD

XTR - Turbo Bag

- Rough condition, should still work fine

- $50

SOLD

post-4758-1175321000.jpg

post-4758-1175321012.jpg

post-4758-1175321020.jpg

post-4758-1175321027.jpg

post-4758-1175321034.jpg

post-4758-1175321044.jpg

post-4758-1175321050.jpg

post-4758-1175321056.jpg

post-4758-1175321062.jpg

post-4758-1175321069.jpg

post-4758-1175321077.jpg

post-4758-1175321094.jpg

post-4758-1175321101.jpg

post-4758-1175321110.jpg

Edited by halz

Greddy Radiator Breather Tank

- Not needed, brand new never installed

- 8mm as available on Nengun - Greddy Breather Tank

- $120

Greddy - Catchcan

- Used, comes with hoses to fit ECR33 breather lines, no longer needed

- Fairly good condition, genuine Greddy as purchased from Nengun

- $90

ill take these two thanks im on the gold coast tried to pm not shore if it has worked

I'm keen on the Defi Exhaust Temp Gauge, assuming it's the DF-02406.

Will check my finances in the next few days and let you know via PM...

I'm keen on the Defi Exhaust Temp Gauge, assuming it's the DF-02406.

Will check my finances in the next few days and let you know via PM...

Updated some items and yes the gauge model is: DF02406.

Greddy Radiator Breather Tank

- Not needed, brand new never installed

- 8mm as available on Nengun - Greddy Breather Tank

- $120

Greddy - Catchcan

- Used, comes with hoses to fit ECR33 breather lines, no longer needed

- Fairly good condition, genuine Greddy as purchased from Nengun

- $90

ill take these two thanks im on the gold coast tried to pm not shore if it has worked

payment sent thanks

Halz, does the turbo come with everything it came with brand new? Would be a straight bolt on no fuss on an RB25 as HKS intended right? Still contains the HKS actuator etc.?

do you know how much the turbos are good for?(power figure)

I was making a solid 240rwkw tuned by Racepace. Originally when it was not installed correctly and the ball bearing catridge had broken. Racepace replaced this no more than 5,000km on the new catridge. It spins freely and has pratically no play in it.

But as it turns out, I had a broken ringland in #6 and ended up having to get a complete engine rebuild where I opted for a larger GT2835 which is making 270rwkw.

Halz, does the turbo come with everything it came with brand new? Would be a straight bolt on no fuss on an RB25 as HKS intended right? Still contains the HKS actuator etc.?

Yep, comes with everything that was included as from HKS. The oil water lines from the GT-RS was re-used on my new turbo, so the oil/water lines as the brand new ones from the GT2835 (identical). Also includes the J pipe.

Install should be pretty simple, suits the standard manifold (which I still run) and I had the dump/front pipe as for sale above -- uses the standard exhaust flange.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're not the first person that's said that about this car lol. A Touring wagon GT in Spark yellow mica would be the dog's danglies 😆 I will keep an eye out for a future purchase for sure. The seats are almost like the OEM Recaros... electric adjustment for fore/aft and tilt movements except reclining.   
    • Yes!! I love these! It's a shame its not the wagon though!   Thank everything that's holy that it doesn't have the interior of the Aussie delivered ones. Those seats are so much nicer.  
    • I'm both sorry and thankful that you do that. 
    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
×
×
  • Create New...