Jump to content
SAU Community

Recommended Posts

HI all, well I have had these ongoing Cold Start issues with My S1.5 R33 GTST.

http://www.skylinesaustralia.com/forums/in...=160180&hl=

http://www.skylinesaustralia.com/forums/in...=157857&hl=

Basically, when I go to start the car when it is below 18 Deg C, the car splatters, sounds like it’s a bit flooded, revs at 300 rpm, then coughs, splatters and is fine from there.

I have done many things, and over the weekend what I did was to turn the fuel pump off, and pressurize the fuel system with air, to remove all fuel, you will be surprised to hear that the car will run for 2 minutes on the fuel in the fuel rail alone.

So after ensuring that there was no fuel in the rail, or injectors, I was hoping to solve my problems of cold start, but figuring out that it’s a leaking fuel injector.

WELL, I reconnected the hoses, primed the lines and the car still started like crap.

So I figure it’s not the injectors, but can someone shed some light on if what I did could prove that it was not the injectors.

ALSO I got Nissan Consult but i can't seam to upload the log file as a txt. All I can see is that the O2 sensor keeps saying rich when starting up cold, which seams weird.

Can someone look over these files and see if there is something REALY obvious that is wrong.

Please help me, I am going out of my head.

ALSO, how much water/moisture, would I need in my engine to cause starting issues?

One this i did notice badly, is that while cranking the voltage drops to below 8 Volts, 7.1 to be exact, i presume this is not good. If somone hads a means of analising the datascan logs, let me know i will send the log to them, i can't seam to upload the .log files.

There is now also a squick in the car, like a vac leak, but it's not a vac leak, and as soon as i touch the throttle it disapears. I have checked for leaks, can't find any, could be a belt or something.

HELP.

Link to comment
https://www.sau.com.au/forums/topic/162820-cold-start-fluffiiee-update/
Share on other sites

Have you tried adjusting the IAC's cold start idle. There's a screw on it that allows you to apparently allow more air through when cold.

Mine stops spluttering if I push in more cranking injector time at 10degree's. From memory standard is 24ms, I pushed mine up to 35 and it starts instantly. But thats on a PFC. My stock ecu did the same but obviously not remaped so I wasn't able to test.

Its normal for the o2 sensor to read rich when cold. Since I put the new genuine o2 sensor in it reads 3.98v when I first start the car, then as it warms it quickly drops to 0.2-0.9 and begins cycling.

It can't help doing a vac/leak test. Grab a bit of exhaust pipe, weld a top on to it, 2 t-bolt clamps, either an aircompressor attachment screwed in to the top or drill a hole and use a tyre valve, remove the afm to compressor cover pipe and place the little tool you just made on to the front of the compressors inlet. Spin the motor over to TDC and compress the system to around 10psi. Soapy water and spray it looking for bubbles. :( You can also use a piece of fuel hose shoved in your ear to listen around the IAC and those hard to get to bits (inlet manifold etc)

hay cubes, thanks, that is how i find leaks anyway, will have anothee look see tonight.

I have an SAFC II and a remaped computer, so no go on the cold start enrithcment change, but I THINK i have nailed it down, when cranking my VOLTAGE drops to 7.1 volts, THAT IS BAD i pressume.

I am goign to try another battery to see if that helps.

From some of teh genericl RB25DET logs i have, the lowes cranking voltage i have seen is 9.6V.

So having a shit batery voltage drop is A BAD THING, i presume this can couse a whole lot of problems with igition coil charge times and so froth?

No idea... :S

I had a crapo battery that head a dead cell from new, that was dropping to 9v odd and was sluggish to spin the motor over when cold. But with the correct cranking time at that temp it would still start without a stumble.

  • 1 month later...
  • 3 weeks later...

I reckon on my car, it's the cold start/aac/aircon valve. I have never cleaned them, and i'm gonna give em a go in the holidays. I know you've done all those, but can't hurt to try doing the ones on my car.

Strangely enough, mine hasn't been doing it either, and it's been crazily cold these past few weeks. so strange. I haven't changed anything.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...