Jump to content
SAU Community

Recommended Posts

Guest Yoda

Are roll cages really illegal? I've been looking for the law that says that they are, but can't find it. I know they have just made them compulsory for utes (etc) that want to carry passengers in the back, so maybe they have changed the whole roll cage law. also, it might vary from state to state. i'm in WA at the moment, and think that i should be able to have a roll cage. I heard they are illegal because they cant use the 'jaws of life' on them to cut you out in case of an accident. I figure, if my car is so mashed they need the jaws of life even WITH a roll cage, there aint gonna be much of me to cut out.... :)

any thoughts?

Link to comment
https://www.sau.com.au/forums/topic/16298-roll-cages/
Share on other sites

from what i know of this is in melb roll cages are legal to a certain extent but jap spec ones are not legal preety sure

alot of jop ones bolt onto the floor

the australian standard ones actually connect through the dash into the firewall and are a certain size 40mm thick or somthing while jap ones are 30mm thick.

no one is stoping you from putting one in if its a jap spec one but if you want legal one for racing etc. it will cost ya baout a 1 k to get one made and fitted. but if its for normal driving dont worry about it and if you really want one there are heapz of second hand jap spec ones around =)

Cheers

Link to comment
https://www.sau.com.au/forums/topic/16298-roll-cages/#findComment-334105
Share on other sites

YODA

In WA they are illegal to have a FULL Cage in the car.

However, you are able to get a permit for a half cage or roll bar as they call it. At present I run a full 6 point cage in the car and haven't had any issues with the law at all and it is clearly visible with the huge thick crossbar through the rear window of the car (around 80mm thick with padding).

I have had cops sit on my tail at both traffic lights and on the roads and haven't pulled me over. They have even had a good look at my car while parked at a motorsport event with me there and didn't bother to question it.

It's basically illegal due to the fact that you can smash your head into the bar in an incident and cause yourself damage, but as I see it, its better to have one in the car for safety sake although I hope I never have to use it.

It greatly helps in the handling of the car also which is the main reason I have left it in. If you want one in, you risk a yellow sticker but thats something you have to live with!

Shaun

Link to comment
https://www.sau.com.au/forums/topic/16298-roll-cages/#findComment-334241
Share on other sites

Guest Yoda
Originally posted by RadiuM

YODA

In WA they are illegal to have a FULL Cage in the car.  

However, you are able to get a permit for a half cage or roll bar as they call it.  At present I run a full 6 point cage in the car and haven't had any issues with the law at all and it is clearly visible with the huge thick crossbar through the rear window of the car (around 80mm thick with padding).

It greatly helps in the handling of the car also which is the main reason I have left it in.  If you want one in, you risk a yellow sticker but thats something you have to live with!

Shaun

Link to comment
https://www.sau.com.au/forums/topic/16298-roll-cages/#findComment-334337
Share on other sites

1> after looking at it today, its about 60mm thick without padding.

2> it reduces the car's flex when cornering quite dramatically, im sure the front and rear strut braces also help in keeping the car rock solid.

3> came with the car. :)

my cousin has a 32 cage that I think he will be selling as his son got a yellow for it in his R and he said they wont be bothering putting it back in. So if you have a 32 and are looking for one I could ask him.

Shaun

Link to comment
https://www.sau.com.au/forums/topic/16298-roll-cages/#findComment-335850
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...