Jump to content
SAU Community

Recommended Posts

Id like to hear from all you guys that have dropped in an rb25 into the r32

just wanna know what happends with the vin number and all that stuff at vicroads

do you need engineers to change it?

my engine blew and i wanna drop in the 25 but im worried about the legal BS

insurance i suppose will also be an issue?

cheers

not sure if it is the same in vic but i know for QLD if you change your engine to something that was not designed from factory to be in there then you have to get and engineer to approve it, as far as rego goes the VIN is the same you just take the engineer cert to the dept of transport along with the new egine number, in QLD you also get a mod plate put on the car

not sure if it is the same in vic but i know for QLD if you change your engine to something that was not designed from factory to be in there then you have to get and engineer to approve it, as far as rego goes the VIN is the same you just take the engineer cert to the dept of transport along with the new egine number, in QLD you also get a mod plate put on the car

the r32 came out with an rb25de from factory. so dropping an rb25 into an r32 shouldnt have any problems with rego.

as far as i know, in NSW - if the car came out with an rb26 as the biggest engine and you drop in another of the same series engine that is 2.6L or smaller than you dont need engineering for it.

which means if you dropped in an rb30 you would need engineering.

best thing to do would be to ring up your local rta and ask.

You need an engineers cert.

The motor is over a 100cc upgrade.

What you do is, contact the engineer first before the conversion.

Have a chat to them, tell them your intentions, and they will tell you what is required and what they will need to see done.

Things like brake upgrades, gearbox upgrades, that sort of thing and whatever else they deem neccesary.

There is a list of Engineers on the VicRoads website :)

cheers

The people that have not bothered, generally have been bitten on the ass.

Once you get a cop that has half an idea, you are put off the roads instantly until you fix it.

Which costs you $$$ as you gotta tow the car everywhere.

If you ask me, do it right the first time and it wont haunt you later on.

Especially because the engineer is probably going to ask for brake upgrade etc etc.

Which is more for your own safety than anything else even if you think the car doesnt need it

still like to hear from someone who's done the upgrade

if they even bothered getting the engineers?

I put a Stagea RB25DET into a R32 GTS4. All I did was tell VicRoads that I had changed the engine. They checked that the engine# on the block matched the Engine# on the piece of paper - "Robert is your father's brother".

i just spoke to an engineer he said to do it properly you need to change the whole drive line to the r33's

then get it registered all standard then what you do to it after that is up to you bigger tubro ect ect ect.

i think im just gonna re build my 20 and strengthen all the internals and keep all my mods

if i get epa'ed at least ive got all the standard parts to change back

otherwise i might as well just buy an r33

did he say anything about the brakes? ive got a s2 box with the 25 so im assuming thats ok? I thought you only really had to change the breaks if you put a turbo engine into a non turbo car - 4stud brakes and shit ?

yeah thats right..

he didn't say anything about brakes but basically the whole drive line diff box ect ect

im not too sure about exact things but it sounded like way too much stuf

the thing is its ok if you got a stock looking engine bay

with me i have a top mount manifold to a big ass turbo its no where near stock

a cop will take one look and send me to epa. its not that hard to change bolt on parts back to standard but epa will see its a bigger engine i would have to change the whole thing back

does anyone know how to get more low down torque/power out of the rb20?

by doing engine work that cant be seen like Flowing the heads? would that give more power

im already gonna put forgies conrods and stuff but i want more low down power

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
    • Yes then it will turn on but I want the car features to work  
    • My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • What about if you just give it direct 12v and earth?
×
×
  • Create New...