Jump to content
SAU Community

Recommended Posts

hey i have some questions maybe someone could answer!

1- how do i check if i have a fuel pressure regulator?

2- how do i teel if my hicas is locked?

3- were do i get ecu chipped?

also i am putting rb25t onto my rb20det, to get close to 200rwkw should i get ecu chipped, fuel pressure regulator (if i dont already), cam gears?

also.... prices on chipped ecu, price on fuel pressure regulator , cam gears. and were to get cam gears at good price and were to get fuel pressure regulator.

cheers adrian...

Edited by rad33
Link to comment
https://www.sau.com.au/forums/topic/163499-some-questions-and-help/
Share on other sites

after market fpr can be easily spotted. Sits on the end of the fuel rail usually..are u still running the std fuel pump? If so get that replaced before the FPR (which u wont need for a while yet.) Something like a Bosch 040

Hicas, just look under the rear of your car. It should have a steering rack bolted to the diff. If it does, look at the boot rubbers to see if they have been fiddled with. If they look new, it probably has brass shims under them, or look under the rear parcel shelf in the boot for a little black box wired to the hicas computer that says Tomei. Otherwise its std.

Ecu chipping..decide on how far u want to push the car in later mods. If u cant see yourself going any further get it chipped, but it will cost to remap the chip again later if u add say a larger turbo. A PFC is a good investment for full tuning the car regardless. Shaun does wonders with tuning them. Cam gears are ok, check the forums, or www.perfectrun.com.au

Edited by Bl4cK32

ok atm i have gtr fuel pump, cooler, e-boost, pod, will have rb25t on soon. then i want to go fuel pressure regulator, ecu chipped and re-mapped then up the boost... oh and bov after that! does anyone know a bov that flutters? i cant find any!!! as in like chi chi chi chi lol?

Who have you found that is able to chip & remap the RB25's ECU? In the long run it may be cheaper & as effective to get a piggyback or stand alone ECU.

:D BOV's don't make the flutter noise...I'm assuming you mean the off boost flutter noise?? that's compressor surge. You can either run no bov or put any adjustable aftermarket one & set it at the tightest valve setting.

ok atm i have gtr fuel pump, cooler, e-boost, pod, will have rb25t on soon. then i want to go fuel pressure regulator, ecu chipped and re-mapped then up the boost... oh and bov after that! does anyone know a bov that flutters? i cant find any!!! as in like chi chi chi chi lol?

You probably wont need to get a fpr as yet. I wouldnt trust a 2nd hand gtr pump either...

What are the future plans for the car in terms of power? I pfc is a real good investment. Speak to your tuner or shaun at least and he can put u on a good path

Dont bother with a bov, u will get defected. A pod filter if u must have a woosh sound.

i basically want to get 200-220rwkw! and maybe 12 months later get 250-300 but i really want 220!!! what do u think i should do? whats wrong with gtr fuel pumps? i now mine is very loud hahaha but yeh wat u think will get me to 200-220?

You'll need an adj. fpr for more than 190rwkwish. Depending on dyno.

Grab a nismo one from nengun or a trader on this site. Should see you through to 220-230rwkw.

GTR pumps are old.. BUt they can be good. Just throw a cheap Bosch 040 in it. More than enough. :)

I dont like GTR pumps personally because most of the time u are replacing the std pump because its old, and doesnt flow. I cant see the point of sticking a pump thats just as old on, only for a bit more flow. Id rather rely on a new 040.

At 220 u may be seeing the limits of the afm, so u might need a z32.

For those power goals (more so the future) u may need a pfc, and injectors.

I dont like GTR pumps personally because most of the time u are replacing the std pump because its old, and doesnt flow. I cant see the point of sticking a pump thats just as old on, only for a bit more flow. Id rather rely on a new 040.

At 220 u may be seeing the limits of the afm, so u might need a z32.

For those power goals (more so the future) u may need a pfc, and injectors.

yeppers.... i have a rb20det in my r31 and im gonna put a vg30ballbearing turbo on it, get a remap and run a z32 afm...

jeff from speed lab recon that should c me round 190+kws... i think from memory a remap by jeff is around the 500 mark but could be wrong..

i found my z32 afm from kansai, they were pretty helpful, also try the for sale section here and ns.com... hope that helps a little

thanks for all the help guys!! im gonna get the rb25t put on then adj fpr, z32, and bosch 040 and save for a pfc!

so were can i get cheap PFC, ADJ FPR, Z32 and BOSCH 040?

cheers

Edited by rad33

Most import wreckers should hav Z32 AFM on shelf. You might get lucky in the same respect with a PFC...........from what ive been told an RB25DET one can be used on an RB20 with a couple of wires changed around if you cant get an RB20 one. If you want an 040 new, most auto parts places sell em, second hand, shop around the forums FS sections

r 18inch rims legal for a r32? will it pass regency? also i noticed that my intercooler piping goes through the body just next to the pod filter! is this legal? regency booked for the 27th!!! 3 week wait!

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Crazy how good the aero bar looks compared to the stock one
    • Yes, but you will need to rewire all the things that are different. CAS, coils, etc. Yes, but there is no IAT. What? You can use anything you like. It just has to be hooked up so that it will work.     Or are you wanting to just plug and play without having to do any thinking/work?
    • It's been a little over a decade since I bought the S15. As I did on my socials, I'll share some of my favorite pictures from over the years further below. If you haven't realised, pretty much all the pictures in my posts are ones I've taken.  In terms of updates, I don't have pictures, but I acquired a near-perfect pair of fog lights from a friend of mine, so those got swapped in for the pair I already had. As for the JZX110, I just got it back from being fixed. A few weeks back, I was on the highway when I suddenly drove over something with very little time to react. It was probably the size of a soccer ball, but it went under the car and banged into the underside pretty loudly. I pulled over and realized the fluid leaking was fuel, and of course, it was right near my exhaust. This required replacing the fuel tank. If you happen to be in the same predicament, thankfully this car shares a fuel tank with the JZS171, IS200, and IS300, so it wasn't too painful to replace. Enjoy some pictures as mentioned above, including the carnage from the fuel tank and a bonus picture I came across which shows how ridiculously shiny the Bugels are on the 110. So many more pictures I could share of the S15 but this will do for today, enjoy. 
    • Welcome.  Was the mistake the car, or joining us? 馃槒
    • Yeap, was me and the daughter getting coffee before heading to the new joint to measure up the fridge space and taking some pics that the solar installer wanted of the switch board
  • Create New...