Jump to content
SAU Community

Recommended Posts

Hi all,

ive been having problems with my R33 lately, about 3 months ago my CAS shit itself so i got a new one and it was fine.now a couple of weeks ago it started doing the same thing , cutting out while driving, when at lights stationary even when warming up it would idle then die.

So, i bought another CAS as i thought this was the problem again.I took my car to Race Pace for a cam gear install and to chack out the problem.

The car was there for 2 days and never missed a beat so they couldnt rectify it but they did put in the new CAS just incase.

NOW, this morning i went to start my car and nothing happened, it wont crank over at all

CAN SOMEONE HELP?

sorry guys

it sounds like it wants to start but wont turn over. when i asked the guys at Race Pace they said it was unusual to have 2 CAS shit them selves within 3 months and that it might be another problem like an AFM. could it be something else?

The usual would be check to see if theres fuel in getting in there, afm if its stuffed im sure would cause over richness, But best bet is pull the plugs to see if they are wet from fuel. Next would be see if you have spark you know how to test that? and in specifics do you mean you turn the key and the starter just keeps winding over trying to start? im sure thats what you meant, also doesnt hurt to check fuses especially for things like the injectors fuel pump. also another thing if the plugs are dry, just get a friend undo the return line at the fuel rail and get your friend to just turn it onto the "On" position not start it to see if the fuel pump is sending fuel? Thats a few things there for you to try out Hope they help But generally if the afm "is" stuffed you should atleast get a beat out of your engine im sure

thanks for the info mate ill check all that out, as its probally best to start eliminating all the little things first. its just so hard to comprehend how the problem comes and goes, one day its fine the other day its not and now its just looking pretty

Give it to a workshop and leave it with them till it fails. Then they can use the appropriate tools and diagnois the problem properly. You really need a spark tester and a noid light on the injectors as a minimum to eliminate the CAS and determine exactly whats missing from the equation.

the cam cover is still on, but the problem was there before the cam gear was even put in,even after i picked it up from the tuners it was fine till this morning. Race Pace is highly SAU recommended tuner with high experience with skylines. I would think he followed correct procedure when installing the cam gear.

Well i guess i got to put it on a tow truck and take it to them if there is nothing i can do to fix the problem.

  • 9 years later...

If your car isn't starting and your battery isn't dead there is 3 main things to look out for...

1: check for spark

2: check for fuel supply

3: check compression

If you find all 3 of these things are fine, then start checking to make sure sensors are plugged in and not faulty, for eg throttle position sensor. If compression is fine but there is no fuel or spark, check CAS. If you are in Sydney and need assistance, drop me a pm and I'll give you a hand!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...