Jump to content
SAU Community

Recommended Posts

12.45, I'm over it. Tool time....and tuning needed.

Managed to burn out mates stock clutch in his ca18det 180sx!!

Got a 1.9 60' and 14.6, 3rd gear slipping because clutch was fried.

I'll help him change it, I'm not that mean.

Anyway, a few other skylines out tonight at the creek, and no problems for most.

One r32GTR ran a 10.9, and sounded mad.

A stock black r34GT-t manual ran in the 15's, and a handfull of r33's and silvia's.

At least the weather held up.

Yup very packed last nite due to a few reasons.... a falcon dropped about 398m's of fluid, it was bike nite (about 60 bikes, omg i'd rather watch paint dry) and last Wed + Fri were rained out so that plus school holidays every p-plater in his mirage wanted to run 17's.

Blitz didn't show (smart move).

A few quick VL's in the 9's (Rigoli) and also an r32 gtr did a 10.9 with atleast 1/2 sec more in it (bat launch - looked like it had crappy 17" street tyres). A few other low 11sec gtr's too.

Omg I hope those stunt bikes aren't going to be a regular thing, their is only so many times u can watch a guy do the same trick on a motorbike (did I mention I hate motorbikes?).

Yup very packed last nite due to a few reasons.... a falcon dropped about 398m's of fluid, it was bike nite (about 60 bikes, omg i'd rather watch paint dry) and last Wed + Fri were rained out so that plus school holidays every p-plater in his mirage wanted to run 17's.

Does that mean they bought back FRIDAY NIGHT drags @ WSID?? That puts a smile to my face :( :( :P

i bloody hope they open friday nights again.....it was too packed last night.....i turned up on time and got 2 runs.....when i was getting on average 10 runs a night back in november....

stuffed both runs so it was a complete waste of time...

12.45, I'm over it. Tool time....and tuning needed.

Managed to burn out mates stock clutch in his ca18det 180sx!!

Got a 1.9 60' and 14.6, 3rd gear slipping because clutch was fried.

I'll help him change it, I'm not that mean.

Anyway, a few other skylines out tonight at the creek, and no problems for most.

One r32GTR ran a 10.9, and sounded mad.

A stock black r34GT-t manual ran in the 15's, and a handfull of r33's and silvia's.

At least the weather held up.

what r u luanching at?

coz i would have expected better then that from ur car

i was getting 12.50 with 240wkw with crappy falkens on the car

brett



  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...