Jump to content
SAU Community

Recommended Posts

Hi all

I have sourced a supplier for new old stock of Yokohama racing slicks. These tyres are the old control tyres as used in the Porsche Cup races etc by the GT3 guys.

Bad news is there is only one size and limited numbers

size is 280x680x18 (actual tyre width is 290mm outer to outer and the rolling diameter is 680 overall in respect to aspect ratio.

You will need minimum 9.5 inch rims to use these tyres too but the pricing is very keen if I buy all the stock of them

there is 23 tyres in total available and if I buy them all to use/resell the per tyre GB price will be around the $300 per tyre mark worst case.

Not too sure if many here will be able to use these but you may know fellow races etc that can use them for practice or track days etc. I will also post on SAU forum aswell.

So if anyone is keen let me know and hope to have pics tomorrow I am going there to get a set so I can try them out and if all good will most likely buy them all or most of them at least.

This is my first time advertising here on SAU I am a current member and drive a silver 300zx TT some of you would have seen with you guessed it ZX2NV plates. Go to aus300zx.com to see my past trading history etc with dealings with members on that forum.

Cheers

Jason

Link to comment
https://www.sau.com.au/forums/topic/164264-eoi-yokohama-race-slicks/
Share on other sites

Just be careful to check the date of manufacture for these tyres as with all racing tyres they have a best before date.

Any idea on how long etc. I have heard if they heat cycle from being in hot warheouses etc they can not be that good and thought if I tried a set on my car I would soon find out if they were okay etc.

What do you think is acceptable

Cheers

J

they usally have a bar code type number on them, i know with the TOYO tyres the last 4 dig are the year - ie.2004

What do you think is too old or is it just better to go off the use by date as such. I have a set of Hoosier R3 at the moment and they are S04 which means 04 year I think and they seem fine and actually some 4 or so seconds quicker a lap than street tyres. If these slicks are really old and maybe past there use by date do you think its worth it

Thanks for your help

Jason

Jason, please read the group buy rules thread at the top of the page and update your first with the required information asap.

At a minimum you need to post the details of the supplier providing the items for the group buy, and a clear start and end date.

Thank you

Jason, please read the group buy rules thread at the top of the page and update your first with the required information asap.

At a minimum you need to post the details of the supplier providing the items for the group buy, and a clear start and end date.

Thank you

Thanks for the heads up re posting rules etc. At this stage I posted as an EOI or expression of interest thread to see if anyone would be interested in this type of tyre. There is no actual group buy as yet I am waiting on some more regarding the tyres and use by dates etc and also testing a set personally to see if they are worth it even if cheap.

So let me know if this will suffice for now or if you would still like me to list more detaisl liek a timeline etc as per the guidelines.

Cheers

Jason

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...