Jump to content
SAU Community

My R33 Gtr - With A See Through Bonnet

350z

By 350z,
in Computer Art

 Share

Recommended Posts

342Four Grand Master

342Four

Posted
Posted (edited)

you take two pictures

one with bonnet on and one with bonnet off

using photoshop you 'cut' the bonnet area (can be a bit bigger as its all the same anyway) off the photo with it on, and transfer it to the pic with no bonnet

as it is a different layer, you can use the eraser or blender tool to remove the bonnet layer and make it look like the bonnet has a hole in it

tada....

Edited by 342Four
350z Community Regular

350z

Posted
  • Author
Posted

ive never done it like that lol!! eraser is only one pressure and wipes it all out >_<

use layer masks with the pics and blend them together with an air brush - comes up with a mad effect (especially where you want to blend the bonet with the engine at the edges) you just generally have more control over the picture you are putting together.

layer masks are a MUST if you want them to turn out as best they can :mellow:

hope this helps!

dano4127 Veteran

dano4127

Posted
Posted
ive never done it like that lol!! eraser is only one pressure and wipes it all out :P

use layer masks with the pics and blend them together with an air brush - comes up with a mad effect (especially where you want to blend the bonet with the engine at the edges) you just generally have more control over the picture you are putting together.

layer masks are a MUST if you want them to turn out as best they can :P

hope this helps!

what program you using? no need to use masks or anything like that dude!

try adobe photoshop you will not go back!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...