Jump to content
SAU Community

R32 Coilpacks Cheap Spares $60 Delivered

DREW32
 Share

Recommended Posts

DREW32 Enthusiast

DREW32

Posted
Posted

Hi there members and guests im selling a set of coil packs for a RB20DET R32 also suit r33 s1 engine they are no longer needed as i upgraded to splitfire coilpacks,i did this as one of these coilpacks failed so please NOTE that only 5 are working to full capacity i cant tell you which one failed didnt bother getting them checked but if you buy you will receive the set and can get them tested to find out which one it is , will deliver anywhere in australia at a total cost of $60 will reply to all posts and pm usually early morn or late at night

post-30197-1176938452.jpg

thanglongz Rising Star

thanglongz

Posted
Posted
Where ya located mate? also...there are 2 types of rb20 coilpacks...can you confirm which ones yours are?

Yea theres Carbon (earlier models) and Spring type(I think the 93 model). Hope it helps

GL with sale

DREW32 Enthusiast

DREW32

Posted
  • Author
Posted (edited)
Where ya located mate? also...there are 2 types of rb20 coilpacks...can you confirm which ones yours are?

Grafton NSW NISSAN 22433 60U02 HANSHIN MCP-300 12v hope that helps , r32 is a 1992 model so

Edited by DREW32
DREW32 Enthusiast

DREW32

Posted
  • Author
Posted
So these would be right for a 1990? I didn't know there were 2 different ones...

I reckon they would fit any one else know ?, i didnt know there were two kinds probably same output and fitment maybe just made differently ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      eBay "Hella" oil level sensor

      By PranK · Posted

      Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • Kinkstaah
      Jacks that fit under GTR lips that can reach the subframe?

      By Kinkstaah · Posted

      I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • TurboTapin
      Jacks that fit under GTR lips that can reach the subframe?

      By TurboTapin · Posted

      So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • suko
      J50 clock date suddenly reset to January 1

      By suko · Posted

      Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...