Jump to content
SAU Community

Coil Packs Question....

black_gtst

By black_gtst,
in Engines & Forced Induction

 Share

Recommended Posts

black_gtst Proficient

black_gtst

Posted
  • Author
Posted
if its S1 R33 i think it would be the same as the R32s and its 0.6-0.9 Ohms.

and also check for cracks in them

ended up bein cracks in em, car runnin great at 13psi now. thanks for the help!

cheers

Eatan8 Contributor

Eatan8

Posted
Posted

Hey guys another missfire problem.

I have a S2 Gts-t was told by two different shops that it wasn't coils and also had a new cas put in which fixed nothing i had the ecu gone over and everything was fine i had new plugs put in and had the mechanic look over afr, is there anything i can do to try and fix this problem. Cheers

black_gtst Proficient

black_gtst

Posted
  • Author
Posted
Interested in what you did to resolve this issue?

simple fix, just pull the coil packs off and wrap some flame resistent electrical tape from the plates at the top down to the rubber that clicks onto the top of your plug. it will make sence wen you pull them off. obviestly this is a quick fix. new coils are the textbook way to rectify the problem....

hope that helps.

brett

black_gtst Proficient

black_gtst

Posted
  • Author
Posted
Interested in what you did to resolve this issue?

simple fix, just pull the coil packs off and wrap some flame resistent electrical tape from the plates at the top down to the rubber that clicks onto the top of your plug. it will make sence wen you pull them off. obviestly this is a quick fix. new coils are the textbook way to rectify the problem....

hope that helps.

brett

600DBY Newbie

600DBY

Posted
Posted
simple fix, just pull the coil packs off and wrap some flame resistent electrical tape from the plates at the top down to the rubber that clicks onto the top of your plug. it will make sence wen you pull them off. obviestly this is a quick fix. new coils are the textbook way to rectify the problem....

hope that helps.

brett

hi guys does anyone have any pics of how you tapped the coil packs i tried searching but no luck,thanks.

black_gtst Proficient

black_gtst

Posted
  • Author
Posted
Hey guys another missfire problem.

I have a S2 Gts-t was told by two different shops that it wasn't coils and also had a new cas put in which fixed nothing i had the ecu gone over and everything was fine i had new plugs put in and had the mechanic look over afr, is there anything i can do to try and fix this problem. Cheers

what boost? could be hitting fuel cut but im guessing you have allready thought of that... check the coils yourself, cracks are barely noticeable and will not show that they are stuffed wen doing a resistance test on them. if you pull em off you will see a series of plates, cracks occor in the plastic just below that, its caused by heat under that valley cover that comes on the 20's and 25's from the factory....

worth a try before spending much loved coin trying to diagnose the prob!

hope it helps

cheers

black_gtst Proficient

black_gtst

Posted
  • Author
Posted
hi guys does anyone have any pics of how you tapped the coil packs i tried searching but no luck,thanks.

its pretty easy mate, if you pull 1 off you will see, its just got a series of plates and a plastic box (kinda) underneath. whem lookin at mine the hairline cracks were in the plastic bit. doesnt really matter where you tape up, as long as you can get em back on and bolted down. its really just a quick fix to find out if you need new coil packs!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Did you panel beat the dents or have you tried to repair this only using filler?  Is your sanding block soft/flexible and is following the shape of the panel rather then just knocking down the high points? 
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      I haven't knocked them down yet. I think I made the repair more complex than it should have been. I had rock chips combined with waviness and dents and I tackled it all in one because it was near each other and just end up wasting a bunch of bog lol. I'll knock down those areas and see how I go. And yep what you are saying at the end is correct. I think I might be sanding the top of a steep hill then my sanding block falls into the dent and gets rid of the guidecoat if that makes sense. Though shouldnt unless I'm covering too big of an area with not a long enough block. I'll try something new and provide some updates. Getting there though! Thanks as always.  
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Yeah makes sense, hard to comment on your situation without seeing what your doing. I was talking generally before, I would not be looking to randomly create low spots with a hammer to then have to fill them.  It's hard without seeing what your doing, it sounds like you are using the guide coat to identify low spots, as you're saying the panel is still wavy. I don't see how you're not ending up with patches of guide coat remaining in a wavy panel? Once the high spots are knocked down to the correct level, surely to have a wavy panel you need low spots. And those low spots would have guide coat still in them?
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      So I'll put filler past the repair area a bit to make sure I don't miss anything. Then I'll block it until it's almost level, put the guidecoat, then keep blocking until it's gone. Then it's still wavy.  In regards to hitting the panel, I saw this video might give more context - Skip to 0:47 he knocks it down. But yeah I'm sanding until the guidecoat is gone then checking because otherwise my filler is still well above the bodyline. Unless what you're saying is I should put guidecoat around it early, surrounding the filler then stip once it's gone?
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      I refreshed the OEM injectors with the kit and connected it up. It now ideals okay even with the IACV removed. Driving still has the same cutoff issue like the 550cc injectors so the issue is somewhere else. I bought FPG's Fuel Pump Hanger. I will be installing it next, but it is not as straightforward as I thought it was with my limited wiring knowledge and no instruction on the specific model I purchased (FPG-089). I also got the incorrect billet clamp as I could not find info on the OEM sizing.
×
×
  • Create New...