Jump to content
SAU Community

Recommended Posts

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

Like the 4th pic :( the impuls :( Like what i just got.

The first ones are cool too, actually looked at them aswell before i bought mine. Get black impuls, friend has them on his 32 in deep dish pack and they look awesome.

I personally like the style of the last rim. I prefer black over white and black is easier to keep "looking" clean

How about this style and colour?

post-1811-1177243978.jpg

I too have a red car and have powder coated rims charcol.

post-1811-1177244282.jpg post-1811-1177245803.jpg

Using my mates rims off his XA coupe' (wrong offset)

post-1811-1177244613.jpg

nah I would never buy anything from him - just wanted to have a laugh at his fake crap.

Well he has some cheap but decent rims and other items.

It's easy to bag someone, when you know nothing about his business. He has a 100% ebay rating so he "appears" to be a legit trader :santa: .

I have used the same 19" Lenso Muse rims on my car for the past 5+yrs. These rims have seen numerous track days, motokahana days and drag days and i haven't had ANY issues with them. I noticed he is now selling these same rims for $1000 delivered; damn that's cheap, am actually concidering buying a spare set just incase something happens.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...