Jump to content
SAU Community

Recommended Posts

Hi all,

I am thinking changing my stock fuel regulator as it is "stuff". Been finding a 2nd hand stock one for sometime and no luck. Sick and tire of that, decided to buy a new one. Done some search and I am freaked out about the diffenent types. Rising rate 1:1, 1:7.......blah .......blah. The Nismo one seems all right but there is no specs on them. Not sure its a rising rate type but it seems to be easy in installation and quite cheap.

Anyway, before I buy any of that, I would like to know more about the difference between the stock and after market fuel regulator. Any help will be appreciated. Cheers!

Hey there,

A rising rate fuel reg ads more fuel pressure per pound of boost, i.e 1:1 adds 1psi of fuel pressure in the rail per psi of boost.

Say you have 45psi fuel rail pressure as a base setting, at 15psi boost the rising rate reg adds another 15psi of pressure to the fuel rail so you have 60psi in the rail.......this allows more fuel to be injected per injector pulse and therefore run less risk of leaning out.

As a side note i hear they can be a bastard to tune with as the motor keeps getting more and more fuel and can run rich,

i'm not sure on that as i'm not a tuner.

Regards Andrew :(

Why would you search for a second hand (standard) fuel reg, but be prepared to buy a new afterrmarket one?

That doesnt make a lot of sense.

Ring Nissan, and use the stock reg. There is nothing wrong with it. I ran over 350rwkw on the stock one

Why would you search for a second hand (standard) fuel reg, but be prepared to buy a new afterrmarket one?

That doesnt make a lot of sense.

Ring Nissan, and use the stock reg. There is nothing wrong with it. I ran over 350rwkw on the stock one

second that. I have no issue with the stock one up to 270/280.

The stock reg is 1:1 so is nismo, sard, and SX. The stock reg has a steel diaphram unlike any aftermarket reg that I know of so it should be the most stable. And yes tuning for 1.7:1 or 6:1 or 12:1 rising rate regs is shit. If you like the fancy shit and want a to put a nismo or sard sticker on your car then I would recommend these two otherwise use the stock item.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
    • Trailer got new mudguards to accommodate the new wheels Lightweight ally Painted, stickered and done ✅ 👌  
×
×
  • Create New...