Jump to content
SAU Community

Recommended Posts

hey as a few people may no i turboed my na in january, its been in and out of the tunners just fiddling with it,

Anyways the car has been running really well but for a little while it was running really rich so today i though i would check and re-gap my plugs and do a compression test,

1= 140 2=130 3=140 4=140 5=150 6=160, i though that was pretty normal no probs there the second cylender the spark plug gay was a little out i dont know if that could have done anything to make the comp a little lower but ey its not to bad anyways

Link to comment
https://www.sau.com.au/forums/topic/165606-na-t-update/
Share on other sites

i think the 160 was rounded up a little my mate had the gauge, ok well stupid me i was reading around 2 things i may have done wrong, the car wasnt at operating tempreture so i dont know if that changed the restults but its ment to be at opperating tempreture, and when we were doing it we had one of the push in gauges insted of a turn on one and a little bit of air may have escaped we werent being very accurate just wanted to see if anything seemed way out

Edited by unarmed_skyline
Link to comment
https://www.sau.com.au/forums/topic/165606-na-t-update/#findComment-3066793
Share on other sites

ok i take that back.. they arent all over the place..

they are decent... although i suspect that they've been rounded off to the nearest 10.

20-25 apart would make me personally unhappy. i'd be aiming for +/- 10.

here's an idea of other peoples:

http://www.skylinesaustralia.com/forums/in...t&p=2851103

Link to comment
https://www.sau.com.au/forums/topic/165606-na-t-update/#findComment-3066854
Share on other sites

yeh i think there was a bit of rounding i didnt see the gauge, cars runnings great thou so cant complaine and hey if i blow the rings gives me a reason to rebuild lol, im picking up a daily driver next week so i can afford to have it off the road if something goes wrong

Link to comment
https://www.sau.com.au/forums/topic/165606-na-t-update/#findComment-3066864
Share on other sites

Did you change injectors?,I have put a stock turbo on my na also & it runs pretty good as well.All I did was bolt on the standard turbo & intercooler & didn't change the computer or injectors & I think the injector might be to small so I would like to get some new ones before I spend money on a tune/remap etc

Does anyone know what size the stock na injectors are.

Link to comment
https://www.sau.com.au/forums/topic/165606-na-t-update/#findComment-3082484
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
    • All my Polish car culture insight comes from watching Nightride. So I half expect this to get 1UZ swapped eventually?! Are you going to drive it in winter? I'm always curious how ATTESA would hold up in the snow. There isn't that much opportunity to try it in Australia.  
    • My steering lock unit on my Infiniti G37 has failed. The car is a local 2012 Infiniti G37 (Q60 ) I need to replace the unit My local mechanic said i need to buy a complete steering wheel assembly. Does anybody no any mechanics in Gold Coast or Brisbane who can fix this issue or where i can buy just the Steering lock control unit. Thanks
×
×
  • Create New...