Jump to content
SAU Community

Recommended Posts

FOR SALE:

1988 200ZR Fairlady (Final Edition)

I am very happy to have inspections so call me to arrange on 0411235832 if you are interested or PM me. I most likely won't be able to answer during work hours so leave me your contact details and a preferred time and I'll get back to you. Car is located near Baulkham Hills in north-west Sydney.

These cars are rare and highly sort after in Japan as a classic sports car and its is nearly impossible to find another one in Australia - especially a manual. Everyone loves to stare at this car and most have no clue what it is.

They are basically the body of the Z31 Californian 300ZX with the engine and driveline of an RB20DET skyline.

• Registered until 27th October 2007 (6 months rego)

• Imported by Edward Lee's Imports and first registered by myself in October 2005

• Engineers certificate and compliance plate

• Used as a weekend car so not many km’s driven since first registered in Oz

• Always used Mobile 1 oil and changed with filter every 6000km

• 125 090 km

• Always used 98 RON fuel

• I love this car so I never flogged it and always checked/replaced gear oils and other fluids etc regularly

• Targa top great for summer

• Air Con

• Power steering, mirrors and windows

• Central locking, alarm and keyless entry

• Very regretful sale

ENGINE BAY

• RB20DET making approximately 200kw at the wheels

• HKS GT2540 Turbo (genuine)

- Rated to 350 Horsepower

- Can’t buy these new for under $2,300

- Max boost set to 16 psi / 1.1 bar

• Blitz Electronic Twin Solenoid Boost Controller

- Rated to 2.5 bar

- Can’t buy these new for under $400

• HKS blow off valve and intake pipe

- Can’t buy these new for under $300

• HKS oil cooler kit and oil filter relocator

- Can’t buy these new for under $540

• Kakimoto Racing full turbo back 3 inch s/s exhaust with 5 inch cannon muffler

- Can’t buy these new for under $1000

• 380cc injectors

- FJ20 injectors

- Rated to 350 Horsepower

• HKS front mount intercooler kit (Z31)

- Can’t buy these new for under $1,300

• Re-mapped and tuned ECU and rev limiter removed

• Pod filter with custom heat shield

• Bosch Gold Battery

- Cost $120

• Twin thermo fans

• Oil (Mobil 1), oil filter, gear oil, diff oil, thermostat, radiator cap and coolant changed less than 3000km ago

SUSPENSION and HANDLING

• Four new shock absorbers

- Installed less than 10000km ago

- Cost $500

• New front tie rods

- Installed less than 10000km ago

- Cost $300

• King springs

- Installed less than 10000km ago

- Cost $600

• Tanabe strut brace

- Can't buy new for under $200

DRIVE LINE

• Reconditioned R32 gtst gearbox (new bearings and replaced worn sychro’s)

- Installed less than 10000km ago

- Cost $900

• Twin Plate Brass Button Clutch with lightened flywheel

- Big $ to buy new

EXTERIOR

• RS Watanabe 17 inch two piece rims

- Highly sought after and can’t buy them for under $900 - second hand!

INTERIOR

• Veilside sports steering wheel

• Greddy Boost Gauge

- Can't buy new for under $200

• JVC MP3/CD Player

- Cost $250

• IMPUL Racing Pedals

- Can't buy new for under $150

• RHINO alarm and immobiliser, central locking with additional kill switch

- Cost $250

Why am I selling it?

I love this car but I work long hours and I'm trying to save for an overseas holiday - so I never drove it much anyway (weekends and nights) but I don’t have the time or money to try and fix the problem it has.

The problem is that it is running very rich.

- It needs to be fixed before it can be driven properly – I've had the crank angle sensor and ignitor professional tested by AFI but these are all working properly. I've also swapped the AFM but this didn't fix the problem.

- This would suit someone who is mechanically/electrically minded or familiar with RB engines etc.

- Problem happened 6 weeks ago out of the blue and I have not driven the car since then.

- The car starts but runs so rich that it is very hard to drive. ALSO if the car is left to run for a while, the spark plugs foul (from too much fuel) and need to be cleaned before it will start again. I've had to do this several times.

- I don't want to spend any more time or money trying to fix it when I was planning on selling it anyway to go travelling.

ALSO:

The speedo sensor cable needs to be replaced.

- It stopped working in February and I haven't had a chance to replace it yet.

- Can be bought new from Nissan for $119.

These cars sell for $10000++ (if you can find another one) so if you are mechanically minded then get yourself a bargain.

Asking for $4000 but I will consider ALL offers!!

post-25850-1177314526.jpg

post-25850-1177314548.jpg

post-25850-1177314579.jpg

post-25850-1177314672.jpg

post-25850-1177314770.jpg

post-25850-1177314857.jpg

post-25850-1177314949.jpg

post-25850-1177314976.jpg

post-25850-1177315012.jpg

post-25850-1177315036.jpg

post-25850-1177315059.jpg

Awesome looking car & looks very well maintained!

Do you know what sort of power output it produces atw?

Good luck with the sale, nice price!

Doesn't it say right there..

200kw atw?

Very nice car, could be a good project.

Body looks straight.

Any rust or little niggles apart from the ones you have mentioned?

1 in a bazillion chance, but got any books for it?

Thanks everyone for your interest.

Car has been listed on ebay - search for 200ZR (its the only one)

Fatz: Nah i broke down in dural! must be another one out there having problems. Call or msg me if your interested. Thanks.

200zRRR: No problem. The response has been good so far so i doubt I will divide it up. Thanks.

KummaZ: No books and yes im sure it does have some rust - its been sitting around for a couple of months and I didnt really drive it that much in the first place. Its old and in good condition BUT its not brand new. Body isnt perfect but mostly good. Thats mainly why i want ppl to look at it before offering me money or bidding on it. Dont want any unrealistic expectations. Call or email me if you have any other questions. Thanks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...