Jump to content
SAU Community

Recommended Posts

just checked the old plugs they are NGK R had abit of time so i just put them back in, started the car and went around the block, car hasnt been started in 1 week and it ran perfectly !

il keep an eye on it in the coming weeks hopefuly this was the prob !

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

OK i have exact same problem, R32 GTST RB20DET nistune ecu gtr injectors z32 afm plugs gapped to .8mm hks turbine

Car goes into cold start mode, id love to make a vid on how the motor behaves when starting cold, and i will, WHEN IT STOPS RAINING!!!!!!!!!! grrrr

I start the car (dead cold morning) starts fine, revs well, 30 secs or so after start it clicks into this "Runs Like A Three-legged Billy Goat" mode! NOW i thought it was something to do with the O2 sensor, bought a new one, no change. Coughs misfires under load generally runs like poo, I unplug the O2 sensor, no coughs or misfiring but now surges under load, n same as everyone else this mode clicks off when temp guage hits the middle

Not everyone has this problem i see n id love to find out how to fix it or help fix it!!

Cheers

check resistance of your water temp sensor (both when cold and hot)

if unsure just change anywayz its not that expensive

also make sure you have the correct sparkplugs/heat range...this was the prob with mine believe it or not

I will try to get a multimeter to check coolant temp sensor but now you got me thinking its the plugs lol I recently put a new engine in the car but it was doing the same thing with the old engine, im running brand new DENSO K20R - U11 spark plugs atm gapped to .8mm but the plugs that were in the new engine were NGK-R PFR5A - 11

what would be the correct plugs for my application?

Cheers

Ok so i have an update, turns out its the O2 sensor thats stuffing up my cold start and idle. I unplugged it and everything is fine again, (btw the O2 is brand new)

So im guessing my ECU was tuned with the old stuffed O2 sensor and now the new one is leaning the fuel mixture out too much.

cant figure out why its affecting idle tho.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...