Jump to content
SAU Community

Recommended Posts

I am keen to get a 2way Nismo LSD for my 4WD S1 when it arrives.

I have a few questions though,

I know how a good 2way acts in a light RWD car (My AE86), and I am quite a fan of the handling improvements it makes.

How much different will this be to a heavy 4WD car with Attesa?

Will the loss of rear end traction make the Attesa power up the front wheels?

This sounds a bit dangerous and unbalanced.

Can anyone shed some light on the situation?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/166131-lsd-in-4wd-stagea/
Share on other sites

the autech version came out with LSD as standard ( if it was 1.5 way or 2 way LSD I dont know )

I presume that means the 260rs Autech version? ( still pretty new to this )

so If Nissan did it from factory then it must be ok .. only thing to find out is if its a 1.5 way or a 2 way LSD

Is it going to be an Auto your putting it in?

I am keen to get a 2way Nismo LSD for my 4WD S1 when it arrives.

I have a few questions though,

I know how a good 2way acts in a light RWD car (My AE86), and I am quite a fan of the handling improvements it makes.

How much different will this be to a heavy 4WD car with Attesa?

Will the loss of rear end traction make the Attesa power up the front wheels?

This sounds a bit dangerous and unbalanced.

Can anyone shed some light on the situation?

Thanks

yeah get a manual

get a 2 way

go drifting

on a side note though

you should be fine, if it wants to kick, the atessa will pull power and put it up front anwyays

I don't really want a manual. My AE86 is setup well for sliding.

I want a practical car that can allow me to have some 'fun' when the mood is right.

I'm not worried about the rear end kicking out, more about the front end gripping up as the attesa gives it power (pulling out of the slide aggresively)

the rs4s has a lsd - in fact it has the same gtr diff as the 260rs. see http://www.skylinesaustralia.com/forums/in...563&hl=rs4s

Drive it it is hard to tell what the impact is, as we haven't really got it ever sliding! Car behaves like it's on rails...

Ian

the RS4 does NOT have an LSD

ive done standing burnouts, and well as tried to drift it, and only one wheel spins no matter how hard i clutch kick it, how much i warm up the oil my making figure 8s, no go

soooo i bought a nismo 2 way

well, considering you have a S1 RS4 NOT an RS4 S that really doesn't have much bearing here Grant. Ian is talking about the S2 RS4 S that, apart from being a factory manual, has a lot of extra gear the RS4 doesn't have, and the LSD is only a part of a long list.

Ian - is the factory lsd a 1 or 1.5? would be good to know if one ever popped up on the auctions.

i thought he meant RS4s as in plural

nope, as the post above this states - I meant a RS4S (which is what I said)! Follow the link for details.

newbie101, not sure. What does the gtr one do as it probably is the same. (As said, I just haven't had my stagea sliding at all - it doesn't do it on wet roads, wet tram tracks, or even the odd dirt road). Mind you, I'm not trying to slide it in the first place...

Ian

ive had abit of experience with the gtr lsd and in 2wd and 4wd (had around 550rwhp), 2wd = major major drift action and damn easy to control these long wheel base designs, i could fishtail up the road as far as i want and in any gear lol :) and 4wd is pretty damn good i never really tried any hard cornering with full power because i never got a chance, but 8000rpm launches and its smokin the 2 rears and 1 front wheel ;)

oh god i miss the power of my baby, the gto is seriously lacking in the power department at the moment :)

the rs4s has a lsd - in fact it has the same gtr diff as the 260rs. see http://www.skylinesaustralia.com/forums/in...563&hl=rs4s

Drive it it is hard to tell what the impact is, as we haven't really got it ever sliding! Car behaves like it's on rails...

Ian

what he said.

go the RS4S !!!!!!!!!!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That still isn't a lot to go on. I don't have a Y50 Fuga Head Unit wiring diagram. I can say that a lot of nissans of that age shared head unit plugs, so if you are in Australia something like this would probably help: https://aerpro.com/app091# You plug that into the car loom, then either plug the head unit ISO into that (if it has ISO), or you buy and ISO adapter harness that you wire in. Bit of stuffing around, but once you have ISO its easy to change things in future.
    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
×
×
  • Create New...