Jump to content
SAU Community

Recommended Posts

hey guys,

last post i was talkin about getting a whitline spring/shock package, well i've been looking around, getting prices etc and have found that really only koni, kyb and bilstien make shocks for the r33 and all are standard length. Well now i'm thinking i'll just buy the bilstiens and some king springs (30mm lower) save about $200, a local suspension joint told me that they rang bilstein and they say that the standard length bilsteins will have no problems with 30mm lower springs. i'm sure bilstien wouldnt make a special shock just for whiteline as the whiteline kit is about 30mm lower also. Anyone looked into this or done this type of suspension setup ? feedback ?

cheers

lenno

Link to comment
https://www.sau.com.au/forums/topic/16618-bilstein/
Share on other sites

i'm sure bilstien wouldnt make a special shock just for whiteline

Actually i dont know what you mean by special, but Whiteline shocks do have additional circlip grooves machined into their housings to allow for height adjustment.

Also i believe they are valved to suit the spring rates as specified and used by Whiteline in their kits.

I think Sydneykid could add to this as i believe he knows more than a thing or two about the Whitleline kits . (as well as all other things automotive.:D )

Link to comment
https://www.sau.com.au/forums/topic/16618-bilstein/#findComment-341712
Share on other sites

hey guys

thanks for the help, but really i'm no closer to making my mind up.. either go the whiteline kit or get the shocks and springs seperate, $200 saving.

also if the dude i'm taking to outta syd it right, trying to ring him atm...he sells the bilsteins for $441 a pair, which is the cheapest i could find.

cheers

Link to comment
https://www.sau.com.au/forums/topic/16618-bilstein/#findComment-344481
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
×
×
  • Create New...