Jump to content
SAU Community

Recommended Posts

hey guys,

last post i was talkin about getting a whitline spring/shock package, well i've been looking around, getting prices etc and have found that really only koni, kyb and bilstien make shocks for the r33 and all are standard length. Well now i'm thinking i'll just buy the bilstiens and some king springs (30mm lower) save about $200, a local suspension joint told me that they rang bilstein and they say that the standard length bilsteins will have no problems with 30mm lower springs. i'm sure bilstien wouldnt make a special shock just for whiteline as the whiteline kit is about 30mm lower also. Anyone looked into this or done this type of suspension setup ? feedback ?

cheers

lenno

Link to comment
https://www.sau.com.au/forums/topic/16618-bilstein/
Share on other sites

i'm sure bilstien wouldnt make a special shock just for whiteline

Actually i dont know what you mean by special, but Whiteline shocks do have additional circlip grooves machined into their housings to allow for height adjustment.

Also i believe they are valved to suit the spring rates as specified and used by Whiteline in their kits.

I think Sydneykid could add to this as i believe he knows more than a thing or two about the Whitleline kits . (as well as all other things automotive.:D )

Link to comment
https://www.sau.com.au/forums/topic/16618-bilstein/#findComment-341712
Share on other sites

hey guys

thanks for the help, but really i'm no closer to making my mind up.. either go the whiteline kit or get the shocks and springs seperate, $200 saving.

also if the dude i'm taking to outta syd it right, trying to ring him atm...he sells the bilsteins for $441 a pair, which is the cheapest i could find.

cheers

Link to comment
https://www.sau.com.au/forums/topic/16618-bilstein/#findComment-344481
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I'm thinking beyond spool. The claim in this alone shows evidence for spool only. But spool is one thing, what about the rest of our power band? And if we say 1mm is negligible, what is the relationship like for the gap? Is it linear? Exponential? Linear to a point and then it just doesn't matter anymore and stops getting worse? These are just all the questions... I don't know the answers definitively either.
    • Would love some videos, and if Jackie is keen maybe even a fly by.
    • This place doesn't sound good at all, what a shame. Losing one customer is losing out on more potential customers.
    • My guess? Almost perfect separation. The pressure pulses would bleed across, but because they have to squeeze through the gap, they will be substantially attenuated. Given most twin gates are plumbed back to atmosphere..... I would say that experiment is well understood. But in reality, it would make no difference to spool at all, if they are 2 completely separated gates. What happens downstrema of them will not affect spool at all.  
    • Look, it's very simple. The 6 bolts or the 9 bolts are interface between the clutch and the flywheel. Any flywheel will bolt to any RB crank - the bolts in the centre there are the same same. So, you just need teh flywheel to suit the turbo clutch. That's all. No more to think about. Get both, boost off into the sunset. (only without the boost).
×
×
  • Create New...