Jump to content
SAU Community

Recommended Posts

The issue might be the angle or exact positioning of the bracket that mounts to the rear of the gearbox. My CES pipe has a different but relevant issue that comes from how it lines up with that mounting point. Basically being slightly off there gets carried down the line.

I suspect you will be able to make up an adapter out of a small piece of aluminium that will work to bring the whole thing own a little. There is a little flex in the whole thing so dont worry if you have to pull it down to get it to mount differently. For example, there are two holes so instead of lining up both you could line up the bottom gearbox mount hole with the top exhaust bracket hole and try that for starters.

thanks abo...... i fixed it today, it was hitting on the bracket bolted to the floor pan to stop the tailshaft hitting the ground in the event of failure, so i took the bracket off and elongated the holes and bolted it back up so it sits slightly higher now..... no noises at all anymore yay!!!

30 mins i find that hard to beleive....... anyways i got under the car this arvo and its not hitting up the front it is further down near the tailshaft centre bearing, its hitting the bracket that sits on top of the exhaust and under the tailshaft centre bearing. maybe pics would explain better. Any ideas on a fix????

No joke Ben :D Grey Imports fitted it up for me.

You do need to be weary when fitting any front pipe that when you are removing sections of the exhaust its possible to shift the rest of the system in the process which can result in the problems you have had.

As others pointed out its usually a case of trial and error and hanger/mount adjustment where applicable to get it spot on :D

Nick

hey blitz just out of curiosity what differences did u notice after having yours fitted???

Well, I had a hole in my original factory front pipe which sounded terrible, but once we fitted the new JJR pipe up the car generally sounds a whole lot smoother, with a nicer exhaust note and it seems to drive nicer also.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was getting anxious with the DVLA not knowing if the paperwork is fine or not, so I rang them. No update had been given, but I  was reassured that providing the box was ticked on the V750 then the application will go through fine. I've been checking the DVLA website pretty much every day, in the hope that it would have been done. Fast forward to Monday 29th  and I was greeted with a new screen on the check, and it finally showed as Taxed and MOT'd, woohoo! The car was in desperate need of a clean, not knowing when this day was coming it was put off. As far as I was concerned I had another 3 weeks  I'm not normally one for using snow foam, but I wanted to give it another try It hasn't cleaned up too bad considering it's 21 years old and lived on a boat for a number of weeks. The personalised number plate is J2 XBK, an illegally spaced number plate would have it read J2X BK. BK could either represent  the colour black or Baker, which is my surname. I filmed the first drive, the Youtube link will be at the end. I used the same driving route I did with the 323F V6 when I had a new exhaust installed, heres a couple of photos A few more since then Youtube video can be viewed here: https://www.youtube.com/watch?v=TjkFHPzjGDw
    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
×
×
  • Create New...