Jump to content
SAU Community

Recommended Posts

What rev range??? Splitfire coils are the way to go, get rid of those pusy factory ones and get some decent ones. I personally felt the difference as most others im sure would say the same.

M2C anyway :)

I got missfire issues at the moment. Running about 10 psi, ngk coppers new gapped at .8, coil packs removed from car and cleaned and inspected, no cracks, all small debris and dust vacummed out of the spark plug area..

Still get miss fire at 5k rpm.

My question, is there anything else i should check\try before spending $550 on split fires.. Do you think split fire will resolve the miss fires and allow me to run a little more boost on the stock ecu?

can anyone describe what rich and retard feels like when you overboost on the stock ecu.. totally different to a missfire?

I got missfire issues at the moment. Running about 10 psi, ngk coppers new gapped at .8, coil packs removed from car and cleaned and inspected, no cracks, all small debris and dust vacummed out of the spark plug area..

Still get miss fire at 5k rpm.

My question, is there anything else i should check\try before spending $550 on split fires.. Do you think split fire will resolve the miss fires and allow me to run a little more boost on the stock ecu?

can anyone describe what rich and retard feels like when you overboost on the stock ecu.. totally different to a missfire?

id say buy some split fires. i had the same problem the coil packs looked fine and i was scratching my head. got splitfires now and i can run 15psi on standard ecu.

yeah its a tough call. externally the coils look great. checked thougherly for hairline cracks and there is none. cleaned out where the spring site in.. wased and dried rubber boots that go over plug and coated coils with acrylic..

hmmm.. i guess it would not harm to have the new split fires, id be pissed though if it was another issue as id rather spend the cash fix the issue.. looks like there is one way to find out :blink: .. where is my credit card ...

dude splitfires are an over kill when running 10 psi . my car was breaking down at 5000rpm on similar boost levels when i originally bought my car and up the boost froom 8 to 12psi. replaced faulty coilpacks with second hand stockers and away i went again. the stock coilpacks worked fine until i upgraded turbo to hi flow and tried to wind the boost past 18 psi. im sure if you search the parts forsale section that someone will be selling theres cheap due to upgrading to split fires. dont buy stockers from wreckers they will want drug money for theres.

if you cant get spark with increased boost in the chamber, then it has to be your ignition system.

my packs looked perfect externally. but i had bad misfires up high on stock boost

got spitfires and runs beautifully

there are threads that have alternate cheaper solution. not sure exactly what its called, but you run some sort of external coil configuration with different coil leads. no coil pack per cylinder setup. read it on this forum, had a link to a .co.nz forum thread too. costs about $100 iirc, but more messing around

Edited by InterCooL

ok guys have tried everything and all DIY bandaid fixs but had no luck

so i have just made the payment for some new SPLITFIRES from Nengun

they say i should expext then in from 7-21 days so ill let you all know how they go.

What i Tried before biting the bullet and spending $550 on the splitfires

New Plugs at .8mm

New Fuel filter

cleaned AFM

Cleand Coils (the spring inside) with AFM cleaner

checked for hair line cracks (found nothing)

Taped Coils (waste of time)

Spraid with heat rated silicone (waste of time)

It doesnt look like you have any form of engine management.

I had the same problem on 10psi.

Plugged in a Powerfc and problem gone!

Your engine is goign into rich and retard mode most likely.

You have increased the airflow into the engine by freeing up the intake and exhaust. maybe if you had stock cooler and exhaust 10psi would be ok but now with all your mods the computer is freaking out that there is too much airflow..

I doubt splitfires will help at all.

Things like the wires going to the coils can become brittle in addition to the coils becoming cracked and connections. Splitfire coils offer little over the factory units. The factory units are known to handle substancial boost and power in many cases.

i have a SAFC-II that has been dyno tuned as my engine management

even if the splitfires dont change anything its still a good mod to have done to provent future probs from coils

but as i said will let yo uknow how they go when i get them.

Yeah you should of got them from Aaron (Slide), its abit more expensive but you get them much cheaper and you're buying from a local Sponsor. :)

Anyway yep its good to get them if you're thinking from future proof perspective but I would of used that money to go towards up for a PFC as that would of been alot more 'future proof' then the splitfires in my opinion. :( I'm more of a "if it ain't broke don't fix it" kind of guy, so a lot cheaper way of seeing if you actually needed the coils or not would have been to do what R31Nismoid suggested - swap your set for a set which you know is working from antoher car then see if the problem is still there.

Oh and just fyi, I had the same problem. :( It was all stuttery and felt like crap when I was above about 4000rpm hard on the throttle, initially thought it was coilpacks as well but when I fit the PFC in the problem went away - so must of been R&R. Hopefully won't have to change the coils, but we'll see that when I wind up the boost abit on a new turbo. :P

Edited by Andi

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...