Jump to content
SAU Community

Recommended Posts

i have been told the "SLIP" is for traction control and flashes sliding but when does the "4WD" gets used? i thought it uses it when you loose traction in the back wheels and then uses the fronts like the GTR.it has never been used yet.does it get used when it looses complete traction with the back wheels?

Link to comment
https://www.sau.com.au/forums/topic/16757-gts4slip-and-4wd-lights-near-speedo/
Share on other sites

since i own a gts4 ill help out

it has no traction control, its just a slip warning light, cause sometimes your slipping and you dont even know it

4wd is working 100% of the time

so if all goes well you should never see the 4wd light

the only bad thing bout those lights is i cant find the illumnated dials to fit the gts4

the 4wd isnt working all the time

the car has a eletric senser that throw the power to the frunt wheels as the harder u punch the right foot the more power gos for wood thats y u can pull out the fuse and dino the car on a 2wd dino if it was 4wd all the time u wood not b a bell to do this well thats haw a r32 gts4 is set up dont no haw the 33 is

Originally posted by Ryan D

it has no traction control, its just a slip warning light, cause sometimes your slipping and you dont even know it

got that right, once on a wet night on a long straight stretch on the freeway doing 140 on fifth, when the slip light come on...wtf? real spooky...didn't even know there's any wheelspin...probably very mild. took it easy after that...

the 4wd isnt working all the time

the car has a eletric senser that throw the power to the frunt wheels as the harder u punch the right foot the more power gos for wood thats y u can pull out the fuse and dino the car on a 2wd dino if it was 4wd all the time u wood not b a bell to do this well thats haw a r32 gts4 is set up dont no haw the 33 is

-

Wouldnt that require a variable diff? im pretty sure is all time 4wd

cause many people have told me that it is. and it sure handles like it is. Cause even at top speed i can fly round sweeping bends that are a little harder than average

Doesn't the R33 GTS4 have a torque-split gauge? The R32 version certainly does - it indicates how much torque is being applied to the front wheels. Most of the time, it sits on '0'.

The Nissan 4WD system uses G-sensors and the ABS sensors to determine if / when any power should be fed to the front wheels, either because of wheel slip (ABS) or acceleration loads (lateral / longitudinal G-sensors)

The transfer case has a hydraulic clutch fed from the reservoir in the boot (RH rear corner), to apply 4WD as required.

R33s (GT-Rs at least) tend to go to a sort of limp-home mode if you pull the 4WD fuse.

If the R33 is anything like the R32, then you can't simply bolt a RB25DET from a RWD in the 4WD version. In the R32, the sump pans are different between the RWD and 4WD versions of the RB20DET engine, I'm just guessing the same with the R33, but I could be wrong.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...