Jump to content
SAU Community

Headlights

R DIRTY 3

By R DIRTY 3,
in Western Australia

 Share

Recommended Posts

R DIRTY 3 Grand Master

R DIRTY 3

Posted
Posted

Ive tried the search and found nothing helpful.

My 33 GTST keeps blowing the globe in the front left hand headlight. Who locally can reseal it to stop the moisture getting in to it? Any idea of how much this sort of thing is??

Any advise is greatly appreciated.

Cheers

Brad

Link to comment
https://www.sau.com.au/forums/topic/169019-headlights/
Share on other sites
R34GTTSKY Experienced

R34GTTSKY

Posted
Posted
Ive tried the search and found nothing helpful.

My 33 GTST keeps blowing the globe in the front left hand headlight. Who locally can reseal it to stop the moisture getting in to it? Any idea of how much this sort of thing is??

Any advise is greatly appreciated.

Cheers

Brad

had mine done at downunder autos wangara ma whole left headlight was gone

Link to comment
https://www.sau.com.au/forums/topic/169019-headlights/#findComment-3123892
Share on other sites
Kaido_RR Grand Master

Kaido_RR

Posted
Posted
AS mitchy said, mine is series 2. I dont know for sure, but Mitchy seems confident they are different so ill go with him on that.

P.S id never have these anyway. Slighty to much $ to justify

agree lol 1k for headlights is crazy lol! i hope you find someone to fix up ur headlights because s2 r33 headlights are alot more $$$ than s1 (between $500 to $1000, depending how lucky you are)

Link to comment
https://www.sau.com.au/forums/topic/169019-headlights/#findComment-3125965
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...