Jump to content
SAU Community

Rb25det Bottom End Cheap - Top Feed Fuel Rail For Rb25.

slip
 Share

Recommended Posts

slip Mentor

slip

Posted
Posted

INJECTORS ONLY available, all else sold.

Was running 6 x 550cc denso injectors. Will make plenty of HP. 2 of the injectors have slight damage on the end, might still be fine, but probably easily fixed by an injection specialist, contact me to discuss if you are keen on the injectors as well. Retail at $220 each or something. 4 for $250 or 6 for $300

Cheap RB25DET bottom end for sale. The car had a front end hit, harmonic balancer and oil pump are cactus. The engine did not run with no oil though. 1 P/S mount hole damaged - picture attached. Still has manual flywheel on it. Just sold the head. Bores look fine, was making 233rwkw nicely. SOLD SOLD SOLD.

Top feed fuel rail to suit RB25DET - $100. SOLD SOLD SOLD

0411870159

pm or reply here.

post-105-1179555264_thumb.jpg

post-105-1180440342_thumb.jpg

James_03 Mentor

James_03

Posted
Posted

what series rb25 man? I think this would only work with the r32 style intake on the early rb25's.

If it works with the later series intakes consider it sold cos I will take it.

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...