Jump to content
SAU Community

Recommended Posts

nismo's rated them @ 570kw..so i just insert it into paul's table

just an indication

r u sure they're IDENTICAL?

:)

Nismo AFM's are rated at about 700HP @ flywheel.... and as ash said, the actual element in it is the same as the Z32...but they are just a direct bolt on...no stuffing around with plugs/cutting piping.... when you pick which AFM you have on the PFC you pick Z32...

<Reference>

80m RB25 airflow meter can measure up to approx. 300ps (221kW)

80mm VG30 airflow meter can measure up to approx. 500ps (368kW)

90mm VH41 airflow meter can measure up to approx. 400ps (294kW)

*Output is calculated off of measurable air volume

from apexi's documentation, go figure

no idea how the q45 is so low

:domokun:

Yes,

I have put 2 RB25afm's on my gtr...bought for $200 dollars...second hand off a member of this forum...got them fitted...modified old intake.

Had to buy 2 adaptors from Just Jap Sydney $80.....total...

So was in for cams and retune anyway...so fitting was $200(That is cutting the Tomie pipes that were there...installation of some adaptors as mentioned and

some silicone hose and clamps....it all looks good...total cost..

$480.....

Tekin - What were the adapters?

Just about to install the same and was under the impression I could heat the standard rubber hose that connects to the AFM and stretch it over the new 80mm units (advice of guru SK). I know I need to adapt the air box end.

Do I need a rethink?

Cheers

Tekin - What were the adapters?

Just about to install the same and was under the impression I could heat the standard rubber hose that connects to the AFM and stretch it over the new 80mm units (advice of guru SK). I know I need to adapt the air box end.

Do I need a rethink?

Cheers

Hello,

You will need 2 x Z32 Adapters.

JustJap Auto Imports

$65 postage and handling included.

I payed by credit card.

02 9545 0532

You will see there are different holes marked on these....line them up to the ones you want,and drill them out.

Rubbers,gaskets come with it.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...