Jump to content
SAU Community

HKS GT-SS Twin Turbos - RB26DETT

Blitz
 Share

Recommended Posts

Blitz Grand Master

Blitz

Posted
Posted

Hi guys,

Due to some recent upgrades, I now have for sale one excellent condition set of HKS GT-SS Turbochargers to suit RB26.

These turbos were purchased brand new, and fitted to my car during my recent engine build and have only travelled 7,000 Km's so they are as-new.

They come complete with HKS Strengthening Actuators, and are renowed for their awesome response so they really are the ultimate low mount turbo upgrade for a street or circuit GTR.

The picture below shows the complete kit when brand new

post-46-1179663658_thumb.jpg

Both turbos look new, and inspection is welcome for serious buyers only - I will try and get some photos for genuine buyers, but you all know what they look like.

Located in Sydney on the Northern Beaches - Happy to post interstate at the buyers expense.

Im looking for a quick sale, and asking $2150.00 firm for the pair, which I think is a VERY fair price for two excellent condition, close to new turbos :P

Serious buyers only.

Thanks guys

Nick

Link to comment
https://www.sau.com.au/forums/topic/169433-hks-gt-ss-twin-turbos-rb26dett/
Share on other sites
  • 1 month later...
240kingdat Rookie

240kingdat

Posted
Posted

Hi nick, I was wondering if you still have those HKS gt-ss turbos still for sale? I have a 94 bnr32 vspec II which I recently purchased from japan, and I am looking for a few ways to squeeze some extra ps out of my motor, while trying to retain the factory specs of the car as much as I can. Obviously your turbos wouldn't be factory for my car, but I am getting a little boost hungry! anyway, I am not quite sure what the best turbo upgrade would be for me, but I am interested in your turbos, that is if you still have them... and any helpful hints that you may have !

thanks,

Dan

  • 4 weeks later...
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Dose Pipe Sutututu
      new 1.5 LSD issues/concerns

      By Dose Pipe Sutututu · Posted

      Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...