Jump to content
SAU Community

Performance Parts For R33 Gtst

Weapon
 Share

Recommended Posts

Weapon Mentor

Weapon

Posted
Posted (edited)

Hey everyone i have only joined this awesome site today, i am selling a bunch of performance parts as i am changing to an RB26 rather than an RB25

I live in Townsville Far North Queensland

Parts include:

Complete RB25DET

Specs are rebuilt with Arias Forged Pistons and Nismo Rods, ACL Black bearings throughout

Balanced Standard crankshaft

Machined block

Port and polished head with HKS Valves, Valve springs, Retainers etc

N1 oil and water pump

Splitfire coil packs 3months old $300

Engine would be happy to Sell for $3500 ono has done 14000km

Also have a Z32 AFM with Tomei Plug will includ K&N Filter with adapter aswell for $350 (filter brand new and Z32 3months old)

Also have Hybrid Front Mount intercooler with custom piping with blitz BOV and adapter welded on, will include standard BOV block off plate aswell as quality vacuum line $700

Custom Split Dump and Front pipe $275

Blitz 52mm white face boost guage for $175 perfect condition

Autometer Monster tacho with shift light for $125 perfect condition

Stock Sideskirts awesome condition $100

Stock Rear pods for $50 grest condition

Have pics of most things however if pics are not there i will update with pics shortly

PM me or txt me on 0414476623

Having trouble uploading pics, so email me and will email pics back to you

Edited by Weapon
Link to comment
https://www.sau.com.au/forums/topic/170911-performance-parts-for-r33-gtst/
Share on other sites
Weapon Mentor

Weapon

Posted
  • Author
Posted

Also amongst sifting through all the stuff in my garage, i have found stock front dmapers with Koni springs that are in good working order when came off the car, however will get Fulcrum to check them out, also have a Eclipse CD/MP3 headunit approx 12months old

Suspension $100

Eclipse Head Unit $150

I also have 2 exhaust systems that are both Trust exhausts that i am willing to depart with if interested PM for price and pics

/2on Proficient

/2on

Posted
Posted (edited)

You got any pics of the dump/front pipe?? it it for a standard turbo and is it stainless steel and split or bellmouth?

If you have pics of it email them to [email protected] thanks

Edited by /2on
Weapon Mentor

Weapon

Posted
  • Author
Posted

In my quest for space in my garage i have also found a standard series 1 bonnet and boot, bonnet has 3 stone chips on it and is straight with no damage. Boot needs holes from where a gtr wing used to be (thanks to some jealous punks) other than that is straight and undamaged aswell as a stock rear bar all in wine red metallic colour

Bonnet $175

Boot $100

Rear Bar $ 100

Pm for pics

Weapon Mentor

Weapon

Posted
  • Author
Posted

Also i have diliberated over this next item as i was in process of puting a V8 into it ( i know its bad but it was a Nissan V8 lol) I have 1992 Nissan Skyline R332 GTST, 5 speed manual, Black RB20. Engine needs some work as it has been ripped out but is back in, full rolling chassis, Just taking expressions of interest at the moment as i am not sure if i want to get rid of it

Weapon Mentor

Weapon

Posted
  • Author
Posted

ahhh i have just had a truck rock up and he has dropped off my RB26, and i can't fit it in the garage so its in my living room.... Open to any offers on all of these things

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Borci88
      Borg Warner EFR Series Turbo's V 2.0

      By Borci88 · Posted

      Not a problem at all Lithium, I appreciate your help regardless. I've pulled a small part of a log where the target pressure was 28psi and it spiked to 36.4psi. I've only just begun using Data Log Viewer so if I'm sending this in the wrong format let me know.
    • Lithium
      Borg Warner EFR Series Turbo's V 2.0

      By Lithium · Posted

      Sorry had a bit of a week and haven't had heaps of time to follow this, so apologies if I've missed something - any chance of showing a log with the rpm, turbo speed, MAP, and wgdc all in one view? Definitely an "interesting" problem, and while it's definitely worth noting that there was a similar issue with the twins I'd not completely put all bets on the root cause being the same thing.  Keep an open mind, follow the data.
    • Borci88
      Borg Warner EFR Series Turbo's V 2.0

      By Borci88 · Posted

      I built this engine approximately 12 years ago so my own head (brain) is a little grey on the exact hardware in the RB head, however what I recall is. Stock RB25 NEO TURBO Intake Camshaft HKS 260 degree Exhaust Camshaft (R34 GTR) RB25 NEO Turbo Springs  I ported/removed the exhaust stud humps found in the RB25 head so theres less turbulence but it wasn't ported/polished properly, just a hump removal. I've attached two pictures of the before and after to illustrate.     The ECU gets its boost reference from the nipple on the rear of the head on the intake side, behind the fuel rail. The wastegate gets its boost reference from a nipple on the cooler pipe immediately after the comp cover.  Could a decent pressure drop across the intercooler cause the wastegate to be seeing a higher PSI than what the ECU is seeing, and thus it can't control it accurately and quick enough?   We ran a line to the actuator and watched it open and close using an air compressor, while we didn't have a gauge on the line to see when it was cracking open, it was opening smoothly.  I just removed the gate now and even though the documentation says you need to open it in a vice due to preload (which I did), there wasn't any preload on the cap, which is something we noticed straight out of the box as well when new. This silver cap internally is threaded to the actuator rod that runs out the bottom of the straightgate. Not sure how I'm supposed to get this spring out to be frank.. Potentially but everyone else doesn't appear to have to stop at 500kw because of 6boosts design.  I would, but I think I'm getting to that point where if I'm going to do the head and make another 100kw, then I'm going to need a fancy gearbox and quite a few other things and 10k becomes 20k becomes 30k within a few months. I'm not necessarily sold on the idea just yet that the head is restrictive at 4000rpm (and what.. 300kw?) and yet doesn't seem to be restrictive at 7000rpm when it's making 500kw, however I'm obviously not closing the door on that theory.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Yeah - Half the problem is I know this sensor actually goes to 150C.. I'm pretty certain it is min of 11C. So still more data required I suppose. It's really quite hard to get the oil temp to 100+ then immediately pull over and take a reading before the temp drops. Annoyingly I suppose the range I really 'want' is likely 80 -> 120C. TBH the ecu can't really *do* anything with it, and the gauge itself is very visible... ...but you know how it is.
    • The Mafia
      Borg Warner EFR Series Turbo's V 2.0

      By The Mafia · Posted

      My EFR 8474 Black, made 800awhp on a roller dyno. at 25-26psi. E85. Shaft speed was around 106,000rpm 1.01 rear. The rear is maxed.  6 boost Turbosmart 60mm gate 3.5inch exhaust  Head is worked to the shithouse. Bain racing. VCam. 272 exhaust. RB28 - RB26 foundation.  You have an intake issue. Start getting proper data and I mean go back to the simple things.  - Pressure test your intake - Block off the Turbo BOV, you don't need it.  - Test pressure before and after your intercooler If your head is pretty stock, that is your issue. Especially if it is NA.  Take it off and spend $10k on it. 
×
×
  • Create New...