Jump to content
SAU Community

What Is An S1 Engine?

Informer
 Share

Recommended Posts

SilverECR33 Veteran

SilverECR33

Posted
Posted

Nismo S-tune S1 engine is a nismo engine , yes its something special, its better than your stock nissan one. nismo made S-tunes for each model. You will notice the middle one is the nismo 400r which possibly utilized a Tuned version of the S-tune engine :) can anyone confirm?

Rezz Grand Master

Rezz

Posted
Posted
I've seen some GTRs with S1 engines, according to Nismo they have around 400ps which is not all that significant compared to what one can do to increase power. Are they overrated or something special?

I see you're comparing the S1 engine to something alot more 'unstreetable'... are you asking because of the low bang for buck value it seems to have on paper?

The S1 engine are for increased power and torque across the rev range, giving a useable boost in those areas with less stress on the engine. It's a 'street performance upgrade' for GT-Rs (and others) and outright power is not the main focus. Think of it as a higher power RB engine from the Nissan factory, with all the reliability that goes along with it.

ike Collaborator

ike

Posted
Posted
Thats not a 400R.

The 400R has a REINIK 2.8 litre engine called RB-X GT2 (N1 block with forged internals etc etc) 400bhp 478nm lazy

S1 is a rebuilt engine with N1 parts has 400bhp 450nm by nismo

R1 is a N1 block with N1 parts has 450bhp 480nm by nismo

F-Sport is a 2.8L engine with GT block and mostly Gt parts like the Z-tune not sure of the power

hope that helps

ike

ps saw a N1 block (new) on Japanese yahoo for A$1400 GT block was A$4500 new on yahoo nice start

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...