Jump to content
SAU Community

Recommended Posts

Hi Guys,

Ok. It's 6:12 in the morning and I'm at my friend's house in Higgins and his car is sitting in the parking lot in Civic. It's a Series II R33 Gts-t. Some a#$h*&^ broke into the car and tried to hotwire it! They removed the steering wheel mount covers and then played with the wiring, then when the realised that couldn't they just ripped stuff out of the car. THE CAR WON'T START! It appears that there is some cable missing... there are two plugs that dont have anything in them at the top of the steering column. Any ideas???? We checked all the fuses etc. and nothing seems to to be missing.

If anyone could help out please call me, my name is Patrick (Pat... if you don't already know me) and help us out. If you know whats wrong or could lend us the part until we could find a replacement - whatever - we would really appreciate your help.

Phone: 0411487633

Thanks guys,

Pat

Link to comment
https://www.sau.com.au/forums/topic/171155-urgent-help-please-r33-ii/
Share on other sites

sorry to hear bout the break in

by the sounds of it, some amature watched gone in 60 sec and thought he'd have a go, ur best bet would be to track down a wiring diagram and check all the wires as god only knows what they have or haven't done, or you could take the car to a auto electrician could cost a bit :thumbsup: good luck

Update::

On closer inspection after stuffing around with it in the cold at rediculous hours of the morning. we found the problem. they just unplugged a whole bunch of stuff and it was just a matter of finding out what goes where. Car started fine. only problem is we think they took off the wheel and now the Air bag light flashes and the hicas light comes on :thumbsup: anyone got any ideas on that?

Cheers anyways

ouch, never park your skyline in civic

fixed.

Particularly if you're not in the Canberra Centre Carpark - i mean its a wank, but having to have a parking ticket to leave does help slightly, not to mention being a well-lit area with reasonable amount of people walking by frequently.

Deterence is the key.

Did you have an alarm by chance?

Edited by nsanity

hi DJ,

i am having same problem as yours, not exectly same...but a bit...after the minor servicing can car started to flash the HICAS light as well... i know its somthing to do with the High Acceleration control system, But God knows why is it happeing... may be if some one will answer second part of your question in the last reply that shall help me too....

i would say best of luck....

and never leave your car in Civic man... too many P@*S head there....

rao

i am having same problem as yours, not exectly same...but a bit...after the minor servicing can car started to flash the HICAS light as well... i know its somthing to do with the High Acceleration control system, But God knows why is it happeing... may be if some one will answer second part of your question in the last reply that shall help me too....

do you have an aftermarket steering wheel?

Hi nsanity,

no, i am not sure, i bought the car right after one month of importation...therefore, i am not sure if it is aftermarket steering wheel or factor fitted one...

I believe the Original one says "Nissan" or has "SRS" airbag on it.

Anyway, the point being, that HICAS relies on many things, one of those being, the steering angle sensor in the OE steering wheel.

I have a MOMO one of some description, thusly after some time over 80km/h, HICAS light comes on.

There is about a half billion threads on this board about it (including how to get it to do diagnostics in some wierd freaky fashion) but the general thing is, if you see the light come on, its not working.

HICAS is a questionable feature anyway. Yes it does aid the driver in a little way - but if you know what it feels like to be at the edge of handling, HICAS apparently sort of blurs that feeling a little. Meaning that some drivers don't like it, others do.

I don't have it (aftermarket steering wheel) so eventually i'll get around to grabbing a set of lock bars, and pissing off the 20kg of dead weight.

Oh, and disconnecting that bastard led that always comes up.

Edited by nsanity
There is a fuse in the boot, take it out. HICAS is gone. But you still need a locking bar, and if you get hold of GTRGeoff on these forums, He can supply one no problem.

Guys thanks for the help,

Firstly, what is locking bar? Secondly, even though HICAS is not working its okey to drive on without disconnecting it... right?

thanks again...

Guys thanks for the help,

Firstly, what is locking bar? Secondly, even though HICAS is not working its okey to drive on without disconnecting it... right?

thanks again...

A HICAS lock bar is a steel bar with mounts on it that bolts inplace of the rear steering rack and holds the rear wheels completely rigid, therefore locking out the HICAS.

I drove without HICAS on for ages when my car had no speedo, the only thing that will happen is that your steering will most likely be heavy and the rear may feel a little "unsettled" as the rear wheels wont be steering but they may move slightly under load.

I dont think it will do any damage driving without it as mine is working again now after being disabled for a few months.

Edited by Bullet32
A HICAS lock bar is a steel bar with mounts on it that bolts inplace of the rear steering rack and holds the rear wheels completely rigid, therefore locking out the HICAS.

I drove without HICAS on for ages when my car had no speedo, the only thing that will happen is that your steering will most likely be heavy and the rear may feel a little "unsettled" as the rear wheels wont be steering but they may move slightly under load.

I dont think it will do any damage driving without it as mine is working again now after being disabled for a few months.

Dude thanks alot for the information,

any idea how much it will cost me to fix up the HICAS problem, since you have fixed urs....

best regards.... Rao

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
    • Hi @Chupapy i had several leaks from coolant pipes being corroded, i also had one leak on back of the head onto transmission. For me that leak was from the turbo water line. Follow the line to the back of the head The hose and metal pipe had perished these are the best pics I took of it at the time
×
×
  • Create New...