Jump to content
SAU Community

Recommended Posts

Cool. I'm going past Autobarn this morning so I'll check. What did you paint with it and how did it come out?

I saw some comments on the DupliColor site (US) which said it didn't work as well as it was supposed to. Other guys seemed rapt.

I did my callipers, came out AWESOME.

Metalcast base coat, which was a silver colour

Metalcast Blue Anodised paint.

The number of coats makes a big difference. I did two coats on my first calliper. On my next i think i did 4 or 5, and it came out a lot smoother, thicker, and shiney. The thinner 2-coat job looked more metallic and sparkley.

Oh righty then. Mirage is this stuff: http://www.dupli-color.com/products/mirage.html

Found out Autobarn in Tweed don't deal with Dupli Colour but Auto One does.

Mind you teh Metalcast looks kinda flash too. Might use "Smoke" colour on a set of rims.

Woz thinking about maybe rims and a few bit and pieces. Sorta decided Mirage rims might not be so good on a standard looking car though.

Would look like a rat with a gold tooth. Better suited to a show car. Currently thinking the Metalcast Smoke would be a good thing. Car is standard burgundy colour (whatever Nissan call it). Rims are white, which aint a good look on a dark red car.

Update: found out the Metalcast "Smoke" and the Mirage series of paints are not currently imported into Australia. The distributor has no plans to bring them in. CBF'ed basically. So I thought to meself "Fu(k you clowns" and went higher up the food chain. If anyone is interested in any of the Dupli-Color products that aren't available in Oz send me a PM.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...