Jump to content
SAU Community

Recommended Posts

I have a pod filter and needs installing and I need one of those adaptors. I checked with revolution race gear and they didnt have any. so if anyone wants to sell me one for UNDER $30 its sold there and then.

please buzz me on 0438 616 840 anytime tonight or tomorrow(sunday) and I will come pick it up, I am pretty sure the filter is 3"

My apexi wont let me make a cold air box :D (waah!)

Thanks

RiaZ

cool coll thanks guys,

hmm i hadnt actually thought about the s14

this was intended for the R33.

I will PM aidwin

and Psiko I might take you up on that and try to make a cold box for the sr20 while I am at it

I will PM you as well

thanks fellas

thanks skyzzer, revolution race gear has em for $38 but I need to trace the gasket for the apexi so they can match it,

i think it is mild steel, fark i would be happy with plastic $120 for stainless it quite pointless to me as I am not hung up on shine

little bit of rust flakes here and there is what i like

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
    • Something else I have been faffing with while the car was off the road is making the AC work. Assuming the car isn't at a thermal limit the idea of having AC while waiting in line to go on track sounds delightful. I have actually been lugging around the weight of the entire system since 2018 when the RB25NEO went in without it working at all.  The main reason was in the first few events before I got around to re-gassing it the rubber hose that runs under the manifold had the factory heat wrap/sleeve fail resulting in this: ~2 years ago I purchased a complete used R32 AC line set but when I finally went to install it the line i needed was different where the expansion section is I found a local place that was able to replace the rubber section and re-crimp. They also added some modern heat sleeve to the hose Tight fit but fingers crossed this is the last physical piece of the puzzle needed
    • the top black section is bonded to the silver section with some form of rubber. I assume to isolated NVH from the box
    • Plan B? Get someone to machine up a metal bush/collar/whatever it needs to be to replace the rubber? I haven't had a close look at that part recently to have a proper feel for whether that's possible. But it might be easy.
    • I do not want to install a short shifter and the only other stock throw shifter I have seen is the Nismo "Rigid shifter" for $290 So plan A is to fill it with sikaflex to stiffen it up and hope for the best
×
×
  • Create New...