Jump to content
SAU Community

Recommended Posts

;)

just weighing up my options...

ok firstly i know the odds are against me in thins department. i got 275s in the rear and 245s up front. ive been reading through some old threads and

have come up with:

1. dont lower the car on standard shocks (thanks sydneykid) bad bad bad! (which i woundnt do anyway)

2.dont cut springs.. (no way in hell!)

3.make sure you have a good combination of spring rate and shocks.. :thumbsup:

-now having these wheels i assume if im going to get it lowered im going to have to pump guards?? or at least lip them.?

-if anyone is in or has been in a similar situation, what have you done that works good for you??

i dont mind a stiff ride, no track use.. ect.. and it doesnt have to be LOWW!!! just sitting nicley

what springs and shock combo would be good considering my situation?? price roughly??

oh.. and is pumping the guards a massive deal? as in time and money?

Edited by jake33
Link to comment
https://www.sau.com.au/forums/topic/171946-19s-and-lowering/
Share on other sites

Can you post up a pic of your car currently, the one in your sig. is too small. I would like to see how the car sits, and how close to the gaurd your wheels come (from the inside)

Here is a pic of mine. At one stage i did have 275's at the rear, but later found out they where not recomended/legal on 8" wide rims

post-1811-1181303179_thumb.jpg

post-1811-1181303190_thumb.jpg

post-1811-1181303203_thumb.jpg

yeah the rear are 9.5 and the front 8 or 8.5. hard to judge by the pics but the outside of the tyre and wheel sit straight inline with the wheel arch/body. so they dont stick out or anything..

as i said i dont want its dumped on its arse, just sitting a bit (inch maybe) lower than it is now.

cheers

post-35246-1181353811_thumb.jpg

post-35246-1181354143_thumb.jpg

Thanks Jake.

At motokana days, the tyres use to rub, but that is obviously under extreme cornering through witches hats and slaloms, etc. But is all depends on the suspension you have fitted on your car.

Can you measure the current distance from the centre of the wheel up to the centre of the arch on the gaurd: front and rear.

post-1811-1181402802_thumb.jpg

  • 2 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...