Jump to content
SAU Community

Recommended Posts

So heres the deal, I have a spare $2k (due to friend paying me back) and I am not sure what to spend it on.

I figure I may as well spend it on the car given that I can't think of anything else I want right now.

Current mods are:

3" Turboback Exhaust

Pod

Turbotech boost controller

Thats it.

An FMIC is pretty much a given, either the Sliding Performance FMIC kit or the JustJap one (haven't decided yet)

After that im not too sure. I was thinking Fuel Pump and Slide High Flow but then I would be on the stock ECU which can't be all that good. So I thought maybe drop the turbo and get a PFC, but then am I really going to see much gains from a PFC given the stock turbo? And whats this I hear about PFC's being hard to come by these days? So yeah....pretty unsure about what path to go down. EVENTUALLY Ill want to get FMIC, High Flow, ECU, Fuel Pump, Injectors etc but I can't afford all those things for now.

So yeah, sugest a mod list priced at $2k or under (including labour)

Thanks for the help

Link to comment
https://www.sau.com.au/forums/topic/172429-spend-my-2k-for-me/
Share on other sites

So you would definetly sugest the ECU before the turbo?

If u got the coin, i would do it at the same time - Turbo install, ecu install Dyno + Tune hello xtra HORSIES.

Thats me but yeah thats what i would do

Alrighty then. I see the PowerFC at nengun for $800 odd, cheapest ive seen so far really. Was looking at a Bosch 040 pump but have been reading about some problems with it, so was looking at the Tomei or Nismo pump. What is a fuel pressor regulator and how important is it?

have u considered a set of poncams and gears? will get u noticible gains with a stock ecu.

Poncams and cam gears? he doesn't even have an a/m turbo, stock ecu. I reckon it'd probably go backwards in power.

I'd personally spend the money on food, but that's what I like

Alrighty then. I see the PowerFC at nengun for $800 odd, cheapest ive seen so far really. Was looking at a Bosch 040 pump but have been reading about some problems with it, so was looking at the Tomei or Nismo pump. What is a fuel pressor regulator and how important is it?

Is the PFC for an gts25t, as I know they've stopped making them for that model, weather they started production again is another thing... Nengun don't include the freight costs etc. to get you in, so it'd be more like $1100 if they actually have one.

Your best bet would be a slide standard hi-flow ($1000? maybe), Apexi safc ($300) and a genuine walbro pump($250) + tune ($200). I say this because if you get anything bigger than a standard hi-flow you'll be looking at more like 4k as you'll need injectors, afm, clutch, pfc+full tune and other little unexpected expenses. With the combination I mentioned you'll be able to get most out of your car with the money you have right now. Plus it'll be responsive and capable of producing 220rwkW+.

Edited by BAMR33

^ if you can get your hands on a power fc, then go from there.. (remember they stopped making them!! hense why the prices for 2nd hand ones are past 1.4k mark :D )

I suggest, you use your money wisely.

Hunt around for a power fc first. that should be 1.5k max

hahah your money is gone now..

It all depends what you desire. POWER? looks? Bit of both? style?

Maybe get a set of rims?

Edited by siddr20

Checked nengun, and they dont sell power fcs.. so goodluck finding one for 800 :D

Also check if your stock clutch can handle the extra power once its all tuned etc..

So you will need more money there.

its a money pit dude.. 2k wont get you anywhere :D sorry to say.. thats if you want aftermarket ecu etc etc..

Spend 1k, and put 1k into savings!!

theres always litte things that will pop up!! good to have some savings

Edited by siddr20

i'd recommend getting the FMIC and fuel pump (and Cold Air intakes to shield your pod if you dont already) and saving the rest until your ready for the next step - injectors, turbo and ecu.

you COULD get an ECU now, but then your up for a retune when you get your next upgrades.. if your definately upgrading again, i'd hold off the ECU for now until you can do the turbo/inj and ECU in one go.

edit: ahh yes, clutch.. once you add the FMIC and put some boost through it, if your not running an aftermarket clutch, you will be soon enough. between a FMIC, fuel pump, clutch, cold air intakes and the associated installation fees, you aint gonna have much of the $2k left.

Yeah Injectors, afm, clutch etc are not something I can afford at the mo. I was steering clear of a piggy back ecu mainly because everyone here seems to reccomend the PFC

Don't be too scared of piggyback ecu's, people always hate what they don't have. Sure they don't give excessive amounts of features and are not fully programmable but you don't need it. The stock fuel map just needs a little adjustment and the base ignition timing can be advanced as needed with the CAS (not the most accurate way of adjusting ignition timing but still works well :D ).

I have a PFC but thats because I do have after market injectors, afm, bigger turbo etc. And I bought one when they weren't extinct.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...