Jump to content
SAU Community

Recommended Posts

r33 i assume? if so then that is a stock dump pipe. if youe want to complete the exhaust you need a dump and front pipe as well. if your cat is also stock upgrade that to a highflow.

there are a few traders on sau selling these components. search aroung in the classifieds and you'll find something to suit.

also id recommend doing a bit of reading b4 you purchase. there are plenty of debates on here about each of those products and you'll learn something bout your car as you do

Yeah as Basti said. You need:

Dump pipe/front pipe (comes as 1 piece). Or alternatively you can purchase a separate dump pipe and separate front pipe.

High flow cat converter (if you don't have one already). If the cat you have has an inlet & outlet smaller than 3inchs it'll be a standard cat.

As for the dump/front pipe they come in 2 styles, Bell mouth dump & Split dump. Split is said to be better. I can't say as to which is better as I have a bell mouth dump and have not tried the split. However the bell mouth I fitted made a huge difference.

Talk to Just Jap and I'm sure they can work something out for you for a very reasonable price.

yup, stock

I got a bellmouth type from JustJap for $220 delivered around a year ago. stainless steel good value

JustJap sell the split system for $249 atm.... looks to be a top deal.

the sort of dump pipe that will best suit you depends on how much modifying you plan on doing. if you are going to keep it relatively stock then anything is going to be better than nothing. i got just over 200kw with a cheap ebay dump pipe, but i did modify it slightly to flow better.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...