Jump to content
SAU Community

Recommended Posts

could someone find part# for R34 GTT (ER34) ..namely the nissan water temperature sensor that sits under the rocker cover just up on the left from the radiator (near the top left hose)

sensor that fit's more or less directly in to the top hose housing No. 22630-44B20

Looking for the part number for the water pump on a R34 RB25DE Neo

I mainly want to know if its the same pump used in my engine as in a 33 RB25DE(T)

water pump numbers are not the same

R33 RB25DET No. 21010-21U26

R34 RD25DE No. 21010-5L327

hey mate sorry to post again but any luck on the weathershields? I'm trying to find these but for a 32 4dr however Nissan parts haven't been able to help :laugh:

600x450-2006100600001.jpg

600x450-2006100600002.jpg

i am sorry man i don't have any info on R32 accessory's. But the part No. for them weather shields is G3610-04U01. but i can't tell u if they would suit a 4DR. sorry

anyone can help me? its an ER34:

- RB25det Nissan OEM Main stud

- RB25det Nissan OEM Head stud

- RB25det Nissan OEM Piston Rings (86mm)

basically all the rebuilding parts except gasket kit.

thanks.

Looking for the rear seat cup holder, goes in the centre console between the drivers and passengers seats, can get vin if they differ due to interior trim colour.cheers

To suit a 5/2000 R34 gtt

Edited by EJD001
Looking for the rear seat cup holder, goes in the centre console between the drivers and passengers seats, can get vin if they differ due to interior trim colour.cheers

To suit a 5/2000 R34 gtt

two type depending on trim colour.

trim code K and W = No. 96965-AA000

trim code G (BLACK) = No. 96965-AA001

Hey Mate

could you please provide the codes for the following :happy:

i tried contacting nissan and they ask for the codes/ vin number, and i dont have a gtr lol...

Reason why im asking about the HCR32 GTR bar is because my friend had a N1 bumper on his Gtst and it fit up like Factory

with the standard front guards :thumbsup:

So was curious if they made a GTR bar to suit Gtst's width...

COLOUR: Spark silver Metallic- KLOG1

PARTS

1. Nissan HCR32 GTR front bumper code?

2. Nissan BNR32 GTR front bumper code?

3. Nissan BNR32 GTR N1 Version Bumper code?

4. Nissan BNR32 GTR front lower lip code?

Your help is much appreciated if you can :D

thanks! :D

Edited by drftps13=D
2001 R34 GTT RB25DET NEO

After part numbers for

Manual flywheel bolts

fan/drive belts

spigot bush

thermostat

oil filter

Thanks

Flywheel Bolts 12315-42L11

P/S Belt 11720-V7300

A/C Belt 11720-77A01

Fan & Alt Belt 11720-AA001

Spigot Bush 32202-B950A

Thermostat 21200-V7206

Oil Filter 15208-53J0A

Hey Mate

could you please provide the codes for the following :)

i tried contacting nissan and they ask for the codes/ vin number, and i dont have a gtr lol...

Reason why im asking about the HCR32 GTR bar is because my friend had a N1 bumper on his Gtst and it fit up like Factory

with the standard front guards :banana:

So was curious if they made a GTR bar to suit Gtst's width...

COLOUR: Spark silver Metallic- KLOG1

PARTS

1. Nissan HCR32 GTR front bumper code?

2. Nissan BNR32 GTR front bumper code?

3. Nissan BNR32 GTR N1 Version Bumper code?

4. Nissan BNR32 GTR front lower lip code?

Your help is much appreciated if you can :)

thanks! :cool:

As far as I'm aware, Nissan never made a GTR bumper to fit a GTST.

Could someone with FAST please lookup the Nissan part code for the Clutch Master Cylinder and Slave Cylinder from a 94 series 1 R33 GTST

I found this one earlier in the thread for the master cylinder but am unsure if there was a change to the clutch when they changed from series 1 to series 2

Right-o! The year and RB25DET made it a lot easier. I hope this is right. Gasket Set: 10101-17U27-

The Clutch Master Cylinder for the same year car is 30610-21U91-

Hope these help. Ron

Edited by TiTAN

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Dear folks My family members have 4 different cars : Triton 2015 and Corolla 2011 and Mazda3 2012 and Hyundai Elantra 2014 Looking to buy engine oil funnel spill free What I found are are below  https://www.amazon.com/gp/aw/d/B0BBTTJNKX?ref=ppx_pt2_mob_b_prod_image&th=1 https://www.ebay.com.au/itm/145553221359?srsltid=AfmBOoqYBU6Ptw0LU_bAp_k67U3qkF97HHvePkA7iHZw8vUmiwoIRaRr https://www.amazon.com/gp/product/B09X23TCS5?th=1 Is there a funnel with attachment that fits most cars ? Don't mind to spend for a decent quality  Thx  
    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
×
×
  • Create New...