Jump to content
SAU Community

Recommended Posts

could someone find part# for R34 GTT (ER34) ..namely the nissan water temperature sensor that sits under the rocker cover just up on the left from the radiator (near the top left hose)

sensor that fit's more or less directly in to the top hose housing No. 22630-44B20

Looking for the part number for the water pump on a R34 RB25DE Neo

I mainly want to know if its the same pump used in my engine as in a 33 RB25DE(T)

water pump numbers are not the same

R33 RB25DET No. 21010-21U26

R34 RD25DE No. 21010-5L327

hey mate sorry to post again but any luck on the weathershields? I'm trying to find these but for a 32 4dr however Nissan parts haven't been able to help :laugh:

600x450-2006100600001.jpg

600x450-2006100600002.jpg

i am sorry man i don't have any info on R32 accessory's. But the part No. for them weather shields is G3610-04U01. but i can't tell u if they would suit a 4DR. sorry

anyone can help me? its an ER34:

- RB25det Nissan OEM Main stud

- RB25det Nissan OEM Head stud

- RB25det Nissan OEM Piston Rings (86mm)

basically all the rebuilding parts except gasket kit.

thanks.

Looking for the rear seat cup holder, goes in the centre console between the drivers and passengers seats, can get vin if they differ due to interior trim colour.cheers

To suit a 5/2000 R34 gtt

Edited by EJD001
Looking for the rear seat cup holder, goes in the centre console between the drivers and passengers seats, can get vin if they differ due to interior trim colour.cheers

To suit a 5/2000 R34 gtt

two type depending on trim colour.

trim code K and W = No. 96965-AA000

trim code G (BLACK) = No. 96965-AA001

Hey Mate

could you please provide the codes for the following :happy:

i tried contacting nissan and they ask for the codes/ vin number, and i dont have a gtr lol...

Reason why im asking about the HCR32 GTR bar is because my friend had a N1 bumper on his Gtst and it fit up like Factory

with the standard front guards :thumbsup:

So was curious if they made a GTR bar to suit Gtst's width...

COLOUR: Spark silver Metallic- KLOG1

PARTS

1. Nissan HCR32 GTR front bumper code?

2. Nissan BNR32 GTR front bumper code?

3. Nissan BNR32 GTR N1 Version Bumper code?

4. Nissan BNR32 GTR front lower lip code?

Your help is much appreciated if you can :D

thanks! :D

Edited by drftps13=D
2001 R34 GTT RB25DET NEO

After part numbers for

Manual flywheel bolts

fan/drive belts

spigot bush

thermostat

oil filter

Thanks

Flywheel Bolts 12315-42L11

P/S Belt 11720-V7300

A/C Belt 11720-77A01

Fan & Alt Belt 11720-AA001

Spigot Bush 32202-B950A

Thermostat 21200-V7206

Oil Filter 15208-53J0A

Hey Mate

could you please provide the codes for the following :)

i tried contacting nissan and they ask for the codes/ vin number, and i dont have a gtr lol...

Reason why im asking about the HCR32 GTR bar is because my friend had a N1 bumper on his Gtst and it fit up like Factory

with the standard front guards :banana:

So was curious if they made a GTR bar to suit Gtst's width...

COLOUR: Spark silver Metallic- KLOG1

PARTS

1. Nissan HCR32 GTR front bumper code?

2. Nissan BNR32 GTR front bumper code?

3. Nissan BNR32 GTR N1 Version Bumper code?

4. Nissan BNR32 GTR front lower lip code?

Your help is much appreciated if you can :)

thanks! :cool:

As far as I'm aware, Nissan never made a GTR bumper to fit a GTST.

Could someone with FAST please lookup the Nissan part code for the Clutch Master Cylinder and Slave Cylinder from a 94 series 1 R33 GTST

I found this one earlier in the thread for the master cylinder but am unsure if there was a change to the clutch when they changed from series 1 to series 2

Right-o! The year and RB25DET made it a lot easier. I hope this is right. Gasket Set: 10101-17U27-

The Clutch Master Cylinder for the same year car is 30610-21U91-

Hope these help. Ron

Edited by TiTAN

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...