Jump to content
SAU Community

Recommended Posts

Hey guys, I know this isn't the WTB section but I've already posted there and thought I might try local in SA too. I'm in pretty desperate need of a front left hand site balljoint+hub assembly for my R33. Just got my tires changed today and found out what was causing my uneven wear. Now with the new tires on I don't want to leave it too long before sorting the problem. I've tried all the spare part places that were open today but no such luck, gonna try the rest on Monday but thought to check if anyone here can help out. As you can't just buy the balljoint new I asked Pedders how much for the whole assembly and they said $2000! :( DEFINITELY not going with that option so if anyone can help out or point me in the right direction, would be well appreciated :P

Cheers

Link to comment
https://www.sau.com.au/forums/topic/172996-urgent-help-needed/
Share on other sites

Did it myself, then realised that I needed new bushes on the top of the arm so I just said screw it, took it to Pedders and got them to fit the bushes on both sides plus adjustable camber kit. Plus, since it was only there just over a month ago for a 28 point safety check and they didn't pick this, they chucked in a four wheel alignment for free. Well worth it I say; was chucking it around abit tonight on the way home from the movies and the improvement is definately noticeable :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...