Jump to content
SAU Community

Rb26 Injectors On Rb25neo?

QUICKY

By QUICKY,
in Engines & Forced Induction

 Share

Recommended Posts

Sydneykid Grand Master

Sydneykid

Posted
Posted

R34GTT top feed injector on the left, R33GTST side feed injector in the middle and R32/33/34GTR and R32GTST top feed injector on the right.

RB_Injectors.jpg

:D cheers :(

PS; the search button is your best friend, I seriously doubt that you will be able to think of a question that hasn't already been answered about Skylines on SAU.

Abo Bob Grand Master

Abo Bob

Posted
Posted

It's a damper to smooth out the flow of fuel.

Also I think NEO injectors are 350cc but I have no proof.

As for GTR injectors needing a resistor pack - well maybe they do but they wont fit in the standard manifold so it's a moot point really.

infected flow Rising Star

infected flow

Posted
Posted (edited)
It's a damper to smooth out the flow of fuel.

Also I think NEO injectors are 350cc but I have no proof.

As for GTR injectors needing a resistor pack - well maybe they do but they wont fit in the standard manifold so it's a moot point really.

i was talking impedence high and low to change from gtr to gtt u will need a resistor pack to change them i went down that path a long time ago ..lol and learnt alot about the spray patterns as well if the spray pattern isnt the same the car will sound as though its missing.

rc injectors fit the gtt but were meant for the gtr at the time is was the only known injector that u could get on the market for upgrading the injectors on the gtt that were bigger than the nismo items and power enterprise ones untill a year later when sard brought them out and the other thing that needed to be changed was the impedence as they are different from gtr to gtt so link from new zealnd had a resistor pack to change the impedence.

cheers

Edited by infected flow
wolverine Grand Master

wolverine

Posted
Posted
It's a damper to smooth out the flow of fuel.

Also I think NEO injectors are 350cc but I have no proof.

As for GTR injectors needing a resistor pack - well maybe they do but they wont fit in the standard manifold so it's a moot point really.

definitely 370cc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dylannn
      WTB RB25 Gearbox NSW / central west

      By Dylannn · Posted

      Gday   on the hunt for an rb25 gearbox and clutch to go into my R32 rb25/30 build happy to travel a bit or pay for freight for the right one From my limited research, think I need an rb25 driveshaft yoke to make it fit so I’m after one of those too located Bathurst
    • MBS206
      R33 nismo cluster

      By MBS206 · Posted

      Common for single gauges to be swapped around. My 33 GTST when I bought it had a GTR tacho fitted, everything else was GTST gauges.
    • MBS206
      gauge needle removal

      By MBS206 · Posted

      Google says for a 1998 Nissan Maxima to pull/pry, and the metal pin might even come out with it. I'd do a bit more googling, there was a few videos, find some where the shafts/needles appear most similar and compare the techniques.
    • Predator1
      FS - RB30 Turbo upgrade bolton turbo kit - 600kw

      By Predator1 · Posted

      Details: Turbo Borg Warner EFR 9180 with 1.05 rear housing Upgraded TurboSmart integrated BOV Sanded and powdercoated compressor cover in gloss black Elbow welded with wiggins clamp Speed Sensor(Not included) (Can include oil drain(heat wrapped + titanium intake pipe with almost new filter for a tad extra). Manifold: 6 Boost RB26/30 twin scroll manifold  e-MAP ports drilled into both scrolls(I was using the TAARKS EMAP KIT) Turbo is in excellent condition. Always used Penrite 15w50 Racing oil(Changed less then 2000ks). Also using the Turbosmart OP regulator and filter. Downpipe: 4inch Stainless steel with VBand inlet and outlet clamps(included) Heat wrapped Dual ports for Dyno/Wideband usage Will throw in free 2.5 inch intercooler pipe(2.5inch From turbo outlet to 3.5 inch intercooler) - Powder coated black. Turbo made 563rwkw on mainline hub dyno at around 24-25psi boost - Pump fuel. Will def make over 600kw on e85. Didn't bother as my e-MAP was through the roof with my setup sitting past the choke line. I have a cnc ported and fully built head on my 3.2. Turbine speed saw max of around 109k rpm. I'm running this on my R32 GTR, with AC, and the original power steering pump. The manifold clears the AC lines, ABS, and everything else. Although I had new AC lines because I just wanted new ones and I heat wrapped them as well. This will make more power on a slightly lower capacity motor with a higher PR. And I have since upgraded to a G45-1500. Have pics and videos if need be.  Absolutely nothing wrong with setup. Turbo is in perfect condition. No shaft play or oil leaks at all. All the work was professionally done. The transient response of this is fkn amazing. I cannot rave more about this turbo. If I wasn't chasing 4 figures, I would have kept it. $5000 NZ. Located: Auckland, New Zealand.    
    • PranK
      ATCC Amaroo Park 1987

      By PranK · Posted

      I particularly like the look of the John Player Special team. (Thumbnail isn't different but hit play for the clip)  
×
×
  • Create New...