Jump to content
SAU Community

Blown Turbo Needs Replacement.. What Now?

kelumzi

By kelumzi,
in Victoria

 Share

Recommended Posts

kelumzi Community Regular

kelumzi

Posted
Posted

Hey there my ceramic turbo blew in my R32 at heathcote and needs to be replaced. I am unsure what to do at this stage your thoughts and suggestions?

Looking at buying a second hand RB20DET turbo and have that replaced by a mechanic. I would like to upgrade to something bigger and more powerful but I am under a budget and labour expenses is a problem

How much would a workshop charge to swap a turbo?

The car is drivable however drove it 2 hours home from heathcote sluggish but drivable

Thank you,

RCHOO Grand Master

RCHOO

Posted
Posted
Hey there my ceramic turbo blew in my R32 at heathcote and needs to be replaced. I am unsure what to do at this stage your thoughts and suggestions?

Looking at buying a second hand RB20DET turbo and have that replaced by a mechanic. I would like to upgrade to something bigger and more powerful but I am under a budget and labour expenses is a problem

How much would a workshop charge to swap a turbo?

The car is drivable however drove it 2 hours home from heathcote sluggish but drivable

Thank you,

There is a stock turbo in the for sale section..

Its in QLD all he has to do is stickit in a box and you will have it the next day.

Its out of a 33 so Rb25 he has 350 on it offer him 300 or 350 if he sends it registed post

He says its in good condition with no play.. give him a buzz STOCK TURBO

Al Grand Master

Al

Posted
Posted

Agreed rb25 turbo.

But be warned, these also have a ceramic turbine so can fail just like your current run did.

If you are on a budget, then i assume you don't have the cash for fuel pump, injectors, ecu, tunning, etc. If this is the case, just get a standard rb25 (and keep boost at 11psi) or buy another rb20 turbo. The rb25 turbo will be laggier than the stock turbo.

Al Grand Master

Al

Posted
Posted
I am so embarrassed right now, serves me right though for running high boost

No need to be embarrassed buddy: You blew a turbo, that is prone to failure, i blew a motor, that is regarded as being very tuff, yet i am not concerned :yes:.

Shit happens, just need to fix it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...