Jump to content
SAU Community

Recommended Posts

very nice... so no need to pay $220 eh.

might be an idea to put in a flat clear panel where the red plastic used to be.

now to red bulbs, any ideas?

- lightly paint the bulbs red

- a red plastic between the bulb and the tailights

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

oh yeh forgot about that part, i just went to repco, gave them my old bulbs and asked for red ones, grabbed two pairs of them at 4 bux a pair and all is good,

i only sprayed a very light coat of vht night shade, so light you could see straight through it, however as soon as i put it back in the light assembly they appeared black because the inside of the light assembly is black, this means that light shows through nicely so i dont have to worry about the cops :thumbsup:

putting a clear thing of plastic would be a very good idea and as soon as i have time to do it i will,

all in the cost to do this was

vht night shade $20

red bulbs $8

$28 for r33 tail lights that are rare is pretty good i reckon lol

lol was gonna do this ages ago to match my front foggies but was gonna look shit due to my red brake wing light but i prefer the red on the silver cars

but for some reason they look awesome being clear on other cars

just my 2 cents

good point about it not retaining the red reflector :P

but oh well, just about every other mod iv done to my car is illegal, i mean if the lights didnt light up red i wouldnt have done it but people can still clearly see the red light up so i dont mind lol

good point about it not retaining the red reflector :P

but oh well, just about every other mod iv done to my car is illegal, i mean if the lights didnt light up red i wouldnt have done it but people can still clearly see the red light up so i dont mind lol

lol wanna make another set? lol

Ill pay ya!

  • 2 years later...

That used to be my brothers car. Was making 466RWHP on 20psi. Was a very very tough car - running 10's :geek:

As for the lights, they were custom made. Take out the tail light and well "break" out the red covers. As long as there is a red globe in there (so when u brake its red), then that's fine.

The drop tank was fake, just a drop tank cover. Still looked awesome though!

  • 2 weeks later...
i pulled out the old red lens and took it a plastic extruder to get matched with a clear one. silicon back onto the housing when done. i also tinted the inside of the lens too..

anyone have an idea on who can do this in perth? I emailed a couple places for a cost but noones responded to me

i dont have them anymore, but post 8 on here gives you more info/pics. it's all been covered already, just thought i'd share.

i found replacing the globe with a red one or even the led globes still wasn't enough, so i installed led's into the clear taillights too.

http://www.skylinesaustralia.com/forums/Le...33-t207206.html

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did you pay with a credit card? I'd be putting a charge back through then finding a new sparky to sort it out. 
    • If you mean the alarm immobiliser; theyre internal to the alarm itself which makes that difficult; I couldnt even see where he put it; its not in the same place as last time; but with all black wiring it might be very challenging to trace  I had someone turn the key for me as I know it only primes for a couple of seconds As my post above; I am getting no voltage to the pump at all; but I am testing continuity of the power line (SB) from the pump plug to the relay fine. As well as the negative from the pump plug to a 12V constant.    Yeah; he blammed the no start on a bad battery; said I needed to get a new battery and it'll start. Turns out the battery drained because the tail lights had been on for half the day during the install (the rubber cushion on the brake switch gave out while he was testing it as I have a picture of the car from that morning with the tail lights off..i've replaced that). The battery was turning over the engine just fine for a long time; but got low since lights were draining it so it was too low to test a start after he finished. I bought a new one on his advice...$250 wasted. My original battery charged up just fine and is healthy.    It was running perfectly fine when I messed up the old alarm (programmed out the remotes). He couldnt start it after removing the old alarm; my assumption is that when he unhooked it; he didnt bridge the circuit back when trying to start it. Its always been perfectly fine. The ECU swap and pump were 2 years ago. It's never missed a beat in that time. 
    • This is a big issue for me without the diff. I just have zero drive from the passenger side when drivers side has no traction. Bec's parents place has a crazy steep driveway with odd camber and I have never been able to get up. My bro-in-law's 130i with an (unknown brand) LSD gets up fine as does their dad's Hiace. My car stays at the bottom. We have other odd camber roads around here as we're elevated a bit and if it's raining I can get totally stuck around some hairpins. 
    • Yeah, I am super excited for this.
    • Was the car running before he touched the car?
×
×
  • Create New...