Jump to content
SAU Community

Recommended Posts

  • Replies 951
  • Created
  • Last Reply

Top Posters In This Topic

The good news is I'm staying up for the Sat night this time.

Good thing Snowy!!.. not like last time where you and James had to report to the ice cream truck!! :D someone call Mr. Whippy??!! :D

I will borrow one off Chubbs unless smokenhowzen has one.

Borrow what Andrew?? :D

ok i'm thinking about going down on the thursday to do winton on the friday and watch deca. if someone could pm me the details about accomidation etc that would be great

thanks mitch

1) I'm keen to get an early start on Thursday - like really, really early. I know a couple of you might need to drive down to Sydney and am happy for anyone to crash at my house Wednesday night if it helps.

2) There is a Shell near my house in Neutral Bay that sells Shell V Racing (100 Ron). If you really want that last little edge perhaps we can get gerry cans and see if we can get a few to travel down on Brad's trailer. I run it all the time and it is good stuff.

3) Having done this drive before, I know how nice it was to have a navigator/passeneger (The big A rode there and back with me - we both survived the experience). If anyone wants a ride down and back just to check it out, let me know.

ok i'm thinking about going down on the thursday to do winton on the friday and watch deca. if someone could pm me the details about accomidation etc that would be great

thanks mitch

bump

so can anyone tell me? would really like to do this.

Guys...

Ok I am confused....

Is anyone heading down just on the friday?

Too spaced out to read other posts!!!

Otherwise the mrs and Iwill have a nice social drive ourselves!

Guys...

Ok I am confused....

Is anyone heading down just on the friday?

Too spaced out to read other posts!!!

Otherwise the mrs and Iwill have a nice social drive ourselves!

Yep. a few of us are....

Jess, Andrew, myself, ummmmm, Wayne, Kasey..... ummmm think there is more!




  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...