Jump to content
SAU Community

Recommended Posts

i've been looking everywhere for replacement globes for my R-32

but no luck. :mrt:

apparently i need to find the 'H3C' type globe to fit the R-32

does anyone know where i can find these type of globes..

anywhere besides ebay and JAPAN.

i want to get a nice white coloured beam.. and i just cbf get HIDs right now.

thanks.

Tim.

Link to comment
https://www.sau.com.au/forums/topic/174478-where-to-get-1992-r32-gts-t-globes/
Share on other sites

From what i have found early R32's (ie mine) use a H3C low beam and a H3 high beam. Later R32's that i have looked at are H1 low and H1 high.

As for replacement H3C globes with a whiter/bluer light, decent ones are hard to come by. Philips or Narva don't make them. I tired a set from ebay which had a nice coloured light but only lasted a couple of months. Then i tried a set of Autotecnica ones and one of the globes blew within 5 minutes of putting it in. Then when i pulled it out again it basically disintegrated in my hands.

Might be worth saving up for HID's unless one of the Japanese manufactures makes a decent quality replacement globe.

From what i have found early R32's (ie mine) use a H3C low beam and a H3 high beam. Later R32's that i have looked at are H1 low and H1 high.

As for replacement H3C globes with a whiter/bluer light, decent ones are hard to come by. Philips or Narva don't make them. I tired a set from ebay which had a nice coloured light but only lasted a couple of months. Then i tried a set of Autotecnica ones and one of the globes blew within 5 minutes of putting it in. Then when i pulled it out again it basically disintegrated in my hands.

Might be worth saving up for HID's unless one of the Japanese manufactures makes a decent quality replacement globe.

ohhh dam. so ur saving up for HID's hey?

so your saying there might be a possiblilty that my globes are H1's. that would be sweet.

i went into autbarn and talked to some guy for 1 hour about lights and R-32s..

he said hes tried getting H3 bulbs and then welding them onto the H3C bulb holder thing. that just sounds like TOO much hard work. but a possibility.

i guess HID's are the way to go hey.

time to make some money lol.

DUDE....

H3c's come from any local auto store, or a rice carshop or ANYWHERE it's a lighting fitment

take your light globe out.... the broken one, take it out...

..no, ACTUALLY TAKE IT OUT it's not that difficult,

look at the base, find out and buy the globe you need,

as for HID.... GET IT.... it's an actual investment not a modification because you can see so much better i have a cefiro and the advantages of the HID system are amazing

I agree, HID's are a good upgrade in a way. They light up the entire road, but you're also blinding on coming traffic. I've got a HID kit installed at the moment and if I were to upgrade headlights again, I would go retro fitting. Much better cut off line and no hot spots at all. Only down side to retro fitting is that it's very expensive.

I just blew one fo mine...

a low beam for a 89....

wat type do i need...?

i dont have my car near me this weeks so i cant pull it out, i thought id get the globes b4 i get the car back

wat is the type?

explain the numbers and H1 H3 HC3???

cheers

Chances are, you have the H3C's in your car mate. I'm not positive that they're H3C, but it's most likely. Only way to know is wait till your car comes back and make sure.

H1, H3 and H3C are just the names of the types of globes. They have different focus points and are different sizes (I think H3 and H3C are similar though, but not the same).

autobarn have a few to choose from , i got the phillips crystal vision for my 32. was about 80 a pair. you could probally get cheaper if you shoped around. much whiter and clearer then stock without blowing my wallet on HIDs

H3c's are common now more than a couple of years ago, so dont stress about finding them. A few sponsors on here sell them as well, if not try ns.com as well.

Its a good idea to fit a twin relays as well for the high low beam as the light switch sometimes burns out as there isnt one fitted. This can also make the std lighting appear brighter.

headlight-1.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...