Jump to content
SAU Community

Recommended Posts

Hi,

Just looking for some advice, I started importing my skyline 3.5 months ago and its been stuck in customs/quarantine for approx 2 weeks or more now (I've lost count!)

Apparently, quarantine cleared it and sent it to "Holford" motors for washing and then they must book a second brief inspection to double check the car before it leaves.

They have been planning to book this inspection for more than 5 business days, and my importer rings them daily to try to get it sorted out.

Last time I heard it would be Monday this week, but they have been saying they will do it soon for more than a week.

Has anyone else experienced this problem when importing from Japan?

Is this normal for quarantine?

Regards,

Gareth

I got lucky - Ship arrived Friday, Weekend went by, car went into quarantine inspection Monday passed with flying colours picked up same day and is in my garage by late arvo.

I got stuck for around a week but that was because 2 brokers submitted clearance for my car and it took 3 days to reverse the one I had no contact with and still don't know how they got my details. From what I know though it's around a 3-4 business day process, as you can get charged storage after ariund that. About $25 per day.

haha, 1 week and you're complaining. Try weeks.

My whole importing process took about 8 months. longest wait of my life.

MANWHORE, its been 3.5months all up, it looks like 4 months to get the car or even longer :)

8 months is absolutely ridiculous.

vrfour, thanks for the info, thought I was getting screwed over here, other people who import said they've never heard of this.

My importer has given the customs broker a helping hand with booking it and hopefully it will be done very soon. :)

I was actually wondering if it related to end of financial year but I'm not sure if that makes a difference to quarantine.

Regards,

Gareth

my car got out in 1 week, but now its been stuck at the compliance shop waiting for the government to clear the papers for the compliance plate, going on 6 weeks now. how long can ot take?? :dry:

Sorry to hijack, but that just sounds very wrong.

I was in and out of complaince within about 10 business days only 2 weeks ago.

I think the shops have access to where the government is up to, so they should be able to check this.

For e.g if your paperwork was submitted on the 20/06, the shop can check what day the government body is up to, as in, today they may be working on all submissions which were put in on the 16/06, so you would have 4 days left till they get to yours.

That's what happened in my case anyway, (or what the shop told me was happening) and at all times I knew pretty much exactly when the car would be ready. For around $30 I had the plate flown in overnight as well to reduce even more waiting, cause the weekend was coming up.

I was also constantly ringing/emailing to see where things were up to, not being a pr!ck or anything, just simply asking for an update.

well I've gone from buying a car, to having it on the round in around 8-10 weeks. so that includes shipping, clearance, comlpiance, rego right through to enjoyment. I've had some take longer than that but I would say 2-3 months is the norm from purchase in japan, to driving it registered on the road. 8 months is insane though!

Sorry to hijack, but that just sounds very wrong.

I was in and out of complaince within about 10 business days only 2 weeks ago.

I think the shops have access to where the government is up to, so they should be able to check this.

For e.g if your paperwork was submitted on the 20/06, the shop can check what day the government body is up to, as in, today they may be working on all submissions which were put in on the 16/06, so you would have 4 days left till they get to yours.

That's what happened in my case anyway, (or what the shop told me was happening) and at all times I knew pretty much exactly when the car would be ready. For around $30 I had the plate flown in overnight as well to reduce even more waiting, cause the weekend was coming up.

I was also constantly ringing/emailing to see where things were up to, not being a pr!ck or anything, just simply asking for an update.

Ive been ringing the shop every second day, just too see whats going on with it.

They gave me the number of the government department, i rang them too see why it was taking so long, i couldnt get much out of them, appart from the guy who's doing my papers is away sick, and has been for the last 3 weeks. apparently he looked at the papers the day b4 he went off sick, but there was somthing wrong, so some more papers had to be sent from the compliance workshop to him.

Nothing has happend with my car for 3 weeks now, gettin kinda pissed off. >_<

DoTaRS being slow is a constant problem, because they're always horrendously understaffed and overworked - you think the government will devote resources to a system that takes sales away from the big car manufacturers?? :thumbsup:

tp1gts2, I suspect your workshop ran out of plates and had to wait for new ones to roll over (they can only do 100 cars in any 12 month period), but there can be all number of reasons, none of which would make your workshop look very good if they told you the truth :)

The workshop, RAW Imports have been fantastic, however I was informed that my car cleared quarantine last Friday.

And was supposed to be transported to Richmond but it now it hasn't got to Richmond yet.

I keep calling but I'll have to wait till it gets to Compliance before I can do anything.

Wow, in Adelaide we don't wait very long at all for quarentine to inspect our stuff. Couple of days really. Unless you are coming out of a long holiday such as Christmas or Easter it might be longer...

^^^ Not as good as it used to be - everything's getting pinged for quarantine at the moment. Apparently there's a new inspector not winning many friends...

Maybe Im just lucky :) I havent had any probs as yet (fingers crossed) my last container and 2 RO/ROs were cleared this wed. But Adelaide is small and quiet so Im bound to run into this guy or girl soon boohoo. Surely this inspector doesn't stuff you for more than a week??? arghhh

Yep, 8 months is totally spasticated. Basically, that goes down to everyone taking a lot longer than they are supposed to (including my jap agent not putting it onto a boat because the boats were supposedly full for months - more like he needed a car to drive)

I recently bought over a R33, and i did the customs broking myself.

for the quarantine process it's always better to find out who the inspector was and get in touch with the particular inspector.

for me, car landed on a Monday, it was ready to be picked up on the Friday. (this was because the inspector that initially inspected the car is likely to have the final inspection for clearance)

i had to arrange a tow truck to pick up the car.

Apparently they are going hard on people using trade plates to move cars around.

anyone can shed some light on this? (i used to use trade plates)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...