Jump to content
SAU Community

Rockogtrs 10.4 In Queensland.

N I B

By N I B,
in Western Australia

 Share

Recommended Posts

Butters Experienced

Butters

Posted
Posted

Given there is no car on the HPI drag list that comes close to that 60ft

and we are talking 8 second cars on street drag radials this seems very strange.

http://www.hpi.com.au/drag_records.php

There are cars doing 1.3's in the world but none on true street tyres that I know of !!

The all use drag radials and a good 1000 to 1500 hp !

I mean no offence but I think you gotta look at this logically.

If true this could be some sort of world record.

R31 Chick Mentor

R31 Chick

Posted
Posted (edited)

So let me get this correct Butters, you claim the car is 1000-1500rwhp and must be on drag radials at least? I think by the photo's we can clearly see they aren't any big flash drag slicks on there.

I will let RockoGTR come on here himself and maybe he has a couple of photo's that clearly show the car was on Nexen street tyres, just as it was sent over with. He will be putting slicks or drag radials on it next time, then hopefully the box will hold together and it should go quicker.

This car is DEFINITELY NOT 1000-1500rwhp either, it was nowhere near that.

I will let him no it might be a record and he can inform HPI and show his time slip and join the ranks :thumbsup:

Also bear in mind this car still has full interior and is a comfortable daily drive.

Edited by R31 Chick
2rismo Grand Master

2rismo

Posted
Posted

I don't want to be taken out of context on my comment above so please allow me to clarify.

I think there is something being done differently to most every other GTR that goes to the drags in some department. Whether it's just a perfectly balanced launch from an outstanding driver or some tricky suspension settings, it's incredibly rare to see a 1.3x 60' time from any street GTR and it's especially rare for it to happen on streeters.

I'm not doubting the tyre choice at all when I say that I reckon there's more to it.

Great job though.

R31 Chick Mentor

R31 Chick

Posted
Posted (edited)

The car is extremely well set up from good suspension, good HKS exhaust, good turbo choice for the car, good tune, good driver etc. There is no NOS or any "secrets" on the car and I am sure Jeff would be happy to show anyone. We aren't trying to claim this figure from a stock car and we never mentioned suspension set ups etc... even tho the suspension isn't anything over the top or expensive. It doesn't have coil overs or anything.

There is no denying the figures, its just a very well set up car that anyone with any knowledge could build on what is not a huge budget.

As I am not the guru on the car or a mechanic I think between Jeff, NIB and RockoGTR they can answer all your questions. Pity they are all holidaying or away working.

Edited by R31 Chick
Butters Experienced

Butters

Posted
Posted

I don't mind being taken out of context ... seems to always happen on the net lol

R31 Chick you need to take this less personally, are you his girlfriend ?

I am sorry I believe with a 1.3 60ft if he puts on drag slicks he will not go stuff all quicker.

Did he manage to run another pass with a simular 60ft or is this a once off ?

I'd be keen to see it backed up at another track like willowbank If he does its quite an acheivement taking down the likes of keir wilson and theo woollett to the 60ft !!

He just sneaks into tenth place on HPI list, so well done on that !

R31 Chick Mentor

R31 Chick

Posted
Posted

Nope, I am his ex. Things do go out of context and being Steve's daughter I know this all too well. As my brother built the car is probably why I jump to its defence.

The car will be at Willow Bank soon. There is video footage of the car in rear wheel drive smoking 4th although Jeff hasn't sent it to me yet which will prove the tyre debate.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...