Jump to content
SAU Community

Recommended Posts

I have recently put a big turbo on my gtst and after having it running without an exhaust, (just to make sure it still runs) it wont start. I get a warning light of the dash coming up when i try to start it.

The car does not crank at all, when you go to crank it all you here is a click, sounds like its coming from the starter motor. Battery is fine, and also my windows dont go up or down now could this be the same problem?

I think the warning light might be exhaust gases or something.

Any ideas,

cheers

Edited by SL1D1N
Link to comment
https://www.sau.com.au/forums/topic/175263-car-wont-start/
Share on other sites

I have recently put a big turbo on my gtst and after having it running without an exhaust, (just to make sure it still runs) it wont start. I get a warning light of the dash coming up when i try to start it.

The car does not crank at all, when you go to crank it all you here is a click, sounds like its coming from the starter motor. Battery is fine, and also my windows dont go up or down now could this be the same problem?

I think the warning light might be exhaust gases or something.

Any ideas,

cheers

Had that happen to me recently and it was the battery (drained by the alarm coz i haven't started up the car in a while)

Link to comment
https://www.sau.com.au/forums/topic/175263-car-wont-start/#findComment-3212342
Share on other sites

I have charged the battery since then and had it running also tryied to jump start, i know what its like when the battery is dead. Its not like that its a single click coming from the starter motor area. Also i think a exhaust fault lamp comes up as well just as the keys turned.

Link to comment
https://www.sau.com.au/forums/topic/175263-car-wont-start/#findComment-3212840
Share on other sites

when you go to crank it all you here is a click, sounds like its coming from the starter motor.

also my windows dont go up or down now could this be the same problem?

2 signs of a stuffed battery. Even if it was something like a seized motor, if you had a good battery your windows would be working?! Did you disconnect the battery when installing the turbo? didnt do something stupid and hook it up backwards by mistake?

Link to comment
https://www.sau.com.au/forums/topic/175263-car-wont-start/#findComment-3213030
Share on other sites

Nahh disconnected the battery when did the turbo, will have a play with it and get back to you, im starting to think im the immobiliser.

thanks for the help

sorry didnt realise was still in mates user

Link to comment
https://www.sau.com.au/forums/topic/175263-car-wont-start/#findComment-3214868
Share on other sites

jack power from someone elses car...

you may get that extra volt or two that you need if the other car gives it a rev...

if it doesn't crank then, think about sourcing a new starter motor, or get your alarm looked at...

Link to comment
https://www.sau.com.au/forums/topic/175263-car-wont-start/#findComment-3214883
Share on other sites

OK i need help BAD

Battery is fully charged and have tried to jump start off other vehical, also tryied role start but wont start.

Both windows stopped working at the same time the car stopped starting.

Turn the key one turn radio and clock turn on and work fine.

Second turn all the usually lights come on and my safc turns on and still everything works fine.

Go to crank and you can here a single click from the starter motor area and the exhaust temp. warning lamp comes up. Could this lamp be the problem

Help

Link to comment
https://www.sau.com.au/forums/topic/175263-car-wont-start/#findComment-3222409
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...